1-1 of 1 Answer
Here’s how you can attach the Permanent Outdoor Lights S4: ### Connecting the Light Strings Ensure the power adapter is unplugged before connecting the light strings to avoid issues with lighting up. Connect all light strings together, then attach them to the control unit and power adapter. Secure the waterproof caps for each connection, including the end of the last light string. ### Installation Process Prepare the Installation Area: Clean the installation surface and ensure it is dry before installing. Avoid installing on rainy or hot days for safety reasons. Positioning: Install the lights 2 to 4 inches away from the wall for a smooth wall-washing effect. Use the provided positioning card for accurate measurement. Determine a location where the power adapter can easily connect to a working outlet. Adhesion: Remove the protective film from each light. Peel the adhesive backing and firmly press each light onto the surface for at least five seconds. Do not overstretch the wire between each light. Secure Permanently: For a more secure installation, use cable clips and screws to secure the lights between every two lights. ### Additional Notes The control unit and power adapter are not waterproof. Use a waterproof electrical box or consult an electrician if installing them outdoors. Do not cut the light strings during installation. If you need clarification or encounter any issues during the installation, replacement stickers are included, and additional reinforcement (like cable clips and screws) can be used for better security in areas with heavy wind or rain.
Sorry, there was a problem. Please try again later.