Questions & Answers

Q: QuestionI currently have the pvm1970sr1ss. Is the JVM3160RFSS a good replacement and will I be able to use the brackets I currently have installed?

Asked 5 years ago by Ram.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer This is what I did and I suggest that you do the same. I called GE customer service and gave them the model number of my existing microwave and asked them what microwave I can replace it. It should be the same measurements. The installation may not be same just like mine because you have to remove the old brackets . Believe me I did it all by myself.

  Answered 5 years ago by Perfect

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this microwave a good replacement that will fit in my space. I’ll send specs for what I have and photo of it

Asked 5 years ago by Anonymous.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer This is what I did and I suggest that you do the same. I called GE customer service and gave them the model number of my existing microwave and asked them what microwave I can replace it. It should be the same measurements. The installation may not be same just like mine because you have to remove the old brackets . Believe me I did it all by myself.

  Answered 5 years ago by Perfect

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwhat is the installation charge for a microwave

Asked 5 years ago by coop.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Bisque

• A:Answer $129.99. DIY. The instructions are great. A drill/screwdriver will get it done.

  Answered 5 years ago by KelleyB

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI don’t see a rating for it to go over a gas range. Is it rated for that?

Asked 5 years ago by Ineed2know.

• A:Answer Mine is over gas range no problems

  Answered 5 years ago by geeboy99Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this have the venting on the bottom?

Asked 5 years ago by Loonie.

• A:Answer no, the venting is top, back or front, i have it to the front, which is on top and in front of the microwave you can switch the fan direction to blow out the top front

  Answered 5 years ago by thesatchman

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionReplacing GE Over the Range Microwave Model # JVM1350WW002. IS there another GE Model that uses the same mounting bracket?

Asked 5 years ago by DC.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - White

• A:Answer I'd have to say there's a good chance of that, especially if it's the same model year as the one you have. But if not, the mounting bracket isn't a deal breaker because they are very easy to swap out.

  Answered 5 years ago by Recommended

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI want to replace the existing GE microwave (JVM1540) with this GE microwave which is similar. The installation offer comes in two options: one standard and second with “replacement of range hood”. Do I need to replace range hood while replacing?

Asked 5 years ago by Nikita.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer This is what I did and I suggest that you do the same. I called GE customer service and gave them the model number of my existing microwave and asked them what microwave I can replace it. It should be the same measurements. The installation may not be same just like mine because you have to remove the old brackets . Believe me I did it all by myself.

  Answered 5 years ago by Perfect

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am interested in this unit to replace existing over the range microwave. Which simplest trim kit should I buy to make it fit into 36" space?

Asked 5 years ago by zhenglg.

• A:Answer Hello zhenglg, Thanks so much for reaching out and for your interest in a GE microwave. We'll be delighted to help you. The trim kit needed to make this model fit into a 36" space is JX36CBB. We hope this helps. Best wishes! Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat are the dimensions and does it require hard wiring?

Asked 5 years ago by Jeanni.

• A:Answer Product Height Info 16 1/2 inches Product Width Info 29 7/8 inches Product Depth Info 15 1/4 inches

  Answered 5 years ago by DLamberthVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy old GE JVM 1541 DN1 IS NO LONGER WORKING I WANT TO REPLACE IT WITH GE JVM 3160FBB WILL THE MOUNTING HOLES LINE UP WITH THE EXSISTING HOLES //

Asked 5 years ago by Smokey.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer This is what I did and I suggest that you do the same. I called GE customer service and gave them the model number of my existing microwave and asked them what microwave I can replace it. It should be the same measurements. The installation may not be same just like mine because you have to remove the old brackets . Believe me I did it all by myself.

  Answered 5 years ago by Perfect

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI need to replace my old GE microwave oven model#JVM1540DM1BB which is vented to outside. Is this model a good match? Is this model vented to outside?

Asked 5 years ago by Anonymous.

• A:Answer Hi - This model can be set up to vent externally, and will work great as a replacement for your old model JVM1540DM1BB. - Trey@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questioni have a GE JVM140J001 SPACEMAKER MANUFACTURED IN 1990. LOOKS LIKE YOUR NEW MODEL JNM3163DJWW IS 1" higher and 2' deeper. I have not found a better fit. Will this slightly larger one go in w/o modification and do you think it will look overly awkward?

Asked 5 years ago by Newcondoowner.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Electronic Touch Controls - White

• A:Answer Adjustment will be needed with the height but it was only about 1/2 inch higher and wider!! The depth is about 2 inches deeper but is really not noticeable. It is a great microwave and looks great - cleaner lines!!

  Answered 5 years ago by dougerVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this get hard wired or plugged in?

Asked 5 years ago by Ted.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - White

• A:Answer Hi Ted, thanks for reaching out! This product requires a three-prong grounded outlet. Product rating is 120 volts AC, 60 Hertz, 15 amps, and 1.70 kilowatts. This product must be connected to a supply circuit of the proper voltage and frequency. Wire size must conform to the requirements of the National Electrical Code or the prevailing local code for this kilowatt rating. The power supply cord and plug should be brought to a separate 15 to 20 ampere branch circuit single grounded outlet. The outlet box should be located in the cabinet above the microwave oven and away from any potential microwave ducting. The outlet box and supply circuit should be installed by a qualified electrician and conform to the National Electrical Code or the prevailing local code. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI have a JVM1730DM1BB GE microwave and want to replace it with another GE. Witch model matches mot closely today

Asked 5 years ago by Barneybaby.

• A:Answer Hi Barneybaby! Thanks for reaching out! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. This makes choosing a replacement microwave easy! - NOTE: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. - You can view a nice replacement for your model by searching for this model: JVM6172DKBB. If you don't like the model we suggested, you can also search for similar models: JVM3160DFBB, JVM6175DKBB, PVM9179DKBB. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow much is installation?

Asked 5 years ago by Ed.

• A:Answer self installed which was pretty easy.

  Answered 5 years ago by Hank77

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy GE Microwave Model JVM140H002 is responding irraticaly to key pad inputs. Is there a replacement circuit board available?

Asked 5 years ago by Henry.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Call GE directly it might be coverd under warranty.

  Answered 5 years ago by KerryJerry

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello I am looking to replace a 1991 GE Model J VM130J 001 (Serial No. 925681S) over the range microwave. Will this model work or what models are replacement models for this?

Asked 5 years ago by BC.

• A:Answer Check the dimensions available in the area where the new microwave is to be installed. If there is enough space, it’s likely this unit will be a good replacement.

  Answered 5 years ago by WareVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this unit vent from the top if needed.

Asked 5 years ago by Mom.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - White

• A:Answer Hello and thank you for reaching out about this marvelous microwave. We are always happy to help. This model is capable of venting out of the back, top, or recirculating. Please let us know if you have any more questions. - JB

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace a JVM1759 with an internal exhaust. What do you recommend

Asked 5 years ago by sg.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - White

• A:Answer Hello sg, Thanks for reaching out. We're happy to help you find a replacement. All of our over-the-range microwaves comes with a recirculating charcoal filter kit to allow for recirculating venting. We would recommend JVM3160DFWW as a suitable replacement. We hope this helps. Best wishes -Mike

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question