A:AnswerIm sure it could be used as a countertop item. I dont recall the instructions having and specific issues. Its just designed and built with the bracketing pre installed. And then the individual installation location can dictate exhaust ventilation distribution. Being its designed for Over stove it pulls steam and vapors up theough unit and then blows them out where desired.
A:AnswerYour microwave is 1.8 Cu. ft. The updated version of your unit is JNM3184DPBB, and it is the same size as your current unit. Please know that you will need to use the hardware and brackets that come with the new model, as they are specific. As all of our over-the-range microwaves will replace each other, we also have models JVM6175DKBB and JVM7195DKBB that are similar in size to your current microwave and would be wonderful additions to your home.
A:AnswerReplacing microwave handles requires disassembly of the door, and therefore should be replaced by a service technician. Any adjustment or repair involving the microwave door needs to be followed up by a leak test to make sure of proper fit, operation, and alignment. This must be done by a qualified technician. You can schedule service online by visiting the GE Appliances website or by calling 833-4BODEWELL (833-426-3393) M-F 8AM-8PM ET, Sat-Sun: Closed.
A:AnswerWe're not familiar with a smv-360 and do not have replacement information available. This GE Appliances microwave fits in a 30" wide opening. It offers a 1.6 cubic foot capacity oven interior and offers 1000 watts of cooking power.
A:AnswerAll of our 30" over-the-range microwaves do replace each other! You will need to use the hardware and brackets that come with the new unit, as they are model specific. Thank you for choosing GE Appliances once more.
A:AnswerIf you wish to change the Power Level, you first press Cook Time, select your cooking time, then press Power Level and select a power level 1-10 and then press Start.
A:AnswerWe were unable to location the specifications of your microwave. You will need to ensure that your space meets the requirements listed in the Installation Guide. You will also need to use the hardware and brackets that come with the new unit.
A:AnswerThis lovely microwave will fit in the same space. We do recommend using the mounting bracket and hardware that will be packaged with the new unit.
A:AnswerThanks for letting us know. We recommend scheduling a service appointment for one of our qualified technicians to assess your unit. You can schedule an appointment by calling us at: 1-800-432-2737.
A:AnswerThank you for taking the time to reach out to us with your question. The compatible mounting kit for this modelJVM3160RF3SS microwave is part WB01X10298. The compatible mounting plate if needed is part WB56X11009. This is specific to each model and will come with your unit. We would suggest checking the quick specs guide and installation instructions for details on measurements to see if this would be compatible with your space.
A:AnswerThis model JVM3160DFBB can be set up to vent externally and will work great as a replacement for your old model JVM1540DM1BB. For more information about venting, we would recommend referring to the installation instructions that can be found on the website.
A:AnswerAll of our current over-the-range microwaves, including convection, Advantium ovens, vent hoods, and telescopic downdraft vents can be installed over gas ranges and cooktops, with a combined surface burner BTU rating of approximately 65,000 BTUs or less. As long as the 66" minimum clearance from the floor to the top of the microwave is followed there will be no issues.
