“I'm replacing a overrange MW measuring 29 7/8 wide, 15 15/32 depth, and 16 1/2 depth. What GE models will work?”
Answer This Question
1-2 of 2 Answers
Hi Dakotagal- Thanks for considering GE! We have great news. You can choose any model. Our 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Check out our GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKS with a dark gray, easy clean enamel interior with steam clean option. The Steam Clean feature (found on select microwave models) generates steam to re-hydrate dried spills/splatters making cleaning easier. Check out the Quick Specs at the following link for more details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195SK_EK_C3.pdf - Keep in touch! SUEatGEA
Sorry, there was a problem. Please try again later.Most of the 30” wide models will work. I suggest calling the manufacturer to see if there is a current model that will fit your old bracket or bolt pattern. This would make install much easier. If not, you’ll need to remove old bracket, install new one according to spec, usually at least one screw in a stud. Then use pattern to drill holes for the bolts above the micro. It’s best to tape pattern to cardboard then tape to bottom of cabinet. Dealing with the paper only pattern is difficult. Then orient blower to match what you have. Top, back or recirculate. I had a GE spacemaker that I replaced. GE customer service was very helpful in telling me what models would be best match. Hope this helps.
Sorry, there was a problem. Please try again later.
