A:AnswerHi there, Erica - Great question! This is a countertop only model; it is not designed or approved for a built-in installation. There is not a trim kit available for this microwave model to ensure the correct venting of the unit. Thanks so much for checking! -Mikayla
A:AnswerHi there Kirk,
Thanks for reaching out. We're happy to assist you. This model microwave does not have a trim kit accessory that is compatible with this model. We do apologize for any inconvenience this may cause. Best wishes. Mike@GEA
A:AnswerHello ScottR,
Thanks for reaching out. There is no trim kit that goes with this microwave. This microwave is a countertop and can not be installed inside a cabinet opening. If you need a built in microwave try PEB7227ANDD with the trim kits JX7227SLSS (Stainless steel); JX7230SLSS (Stainless steel). You will need to use the trim kits with the model. We hope this helps. Best wishes -Mike
A:AnswerHi there - Great question! We're finding that microwave model JES2051SNSS does not have a charcoal filter. Thanks so much for checking! -Mikayla
A:AnswerHello Mike,
Thanks for reaching out. We currently do not have a 2.2 cu. ft. countertop with a trim kit and do apologize for this. We do have built in microwaves with 2.2 cu ft. however, you will need a cutout height of 16-3/4" to properly install a built-in microwave. We do apologize about this inconvenience. Best wishes -Mike
A:AnswerHello and thank you for the excellent question about our amazing line of microwaves. We will be happy to help with this.
If your current microwave is built into your cabinets, model JES2051SNSS will not work as a replacement. It is intended for countertop use only and should not be built in.
We recommended checking your local Best Buy for models intended for built in use. Thanks! - JB
A:AnswerHi DD, thanks for reaching out! We're finding that the following built in model has similar overall dimensions for the microwave itself and also has the same cutout dimensions as your old unit: PEB7227ANDD. Though this model is dark gray, it does have Stainless Steel trim kits to help it blend with your other Stainless Steel appliances. These trim kits would need to be used since this unit can only be installed via building it into surrounding cabinetry. These are the trim kits associated with this new unit: JX7227SLSS & JX7230SLSS. We hope that this helps! Stay safe. -Michael
A:AnswerHi there, that's a great question! This model cannot be installed in a cabinet for a built-in look and is not compatible with the trim kit used for the PEB2060SM155 model. It is designed for counter-top use only. We suggest the GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven model PEB7227ANDD. You can view the compatible trim kits as well as cabinet dimensions here:
https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher? RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf
It is important to only use the trim kit designed for that model so that the trim kit fits the microwave, and provides the proper air flow that it needs. We apologize for any inconvenience and hope that this helps. If you have further questions please reach out at geappliances.com. All the best! -Eliza
A:AnswerHello Buffalo7 - Thank you for reaching out about our amazing microwave line. We are more than happy to help find an excellent replacement.
The microwave we offer that will fit the same cabinet cutout size as your current unit is PEB7227ANDD. You can find this model here: https://www.bestbuy.com/site/ge-profile-series-2-2-cu-ft-built-in-microwave-gray/6337997.p?skuId=6337997
The trim kits needed for model PEB7227ANDD are the 27" JX7227SLSS or the 30" JX7230SLSS.
Please let us know if you have any more questions. - JB
A:AnswerHi WingZero - We are sorry to hear your GE microwave model # JE1860WH-002 needs replacing and apologize for any inconvenience this has caused. We suggest GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven
Model #: PEB7227DLWW. This model is compatible with 27" Trim Kit JX7227DLWW and 30" Trim Kit JX7230DLWW sold separately. If you are looking for a stainless option, view GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven Model #:PEB7227ANDD This model is compatible with 27" Trim Kit JX7227SLSS and 30" Trim Kit JX7230SLSS sold separately. We appreciate your loyalty! If you have any additional questions, don’t hesitate to ask. We are also happy to help at GEAppliances.com. Sue
A:AnswerHello and thank you for reaching out about this excellent microwave. The models JES2051SN2SS and JES2051SNSS are the same model. The added number is a line identifier to help identify parts if service is needed. While they are the same model, they are not tested for built-in installation any longer and the trim kit is no longer available. As they are not tested and approved for built-in use, we cannot recommend using this model in your cabinetry with your trim kit. Please let us know if you have any more questions. - JB
A:AnswerHello Sol - Thank you for reaching out about your microwave. We are sorry to hear about the condition of the cavity wall. If the unit is built into your cabinetry, the model PEM31DFWW will fit the same cutout size. Please let us know if you have any more questions. - JB
A:AnswerHI Marie - Thanks for viewing GE Model JES2051SNSS! Electrical Input: 120V; Amperage 13.9; Watts 1650. Our countertop microwaves require a 120 volt individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse. If you have any additional questions, do not hesitate to ask, we are happy to help at GEAppliances.com! Sue
A:AnswerHi Rochelle - It's nice to hear from you! We are sorry to hear your microwave needs replacing and apologize for any inconvenience this may cause. GE Profile PEB1590SM2SS is no longer being manufactured. The comparable model is GE Profile™ 1.5 Cu. Ft. Countertop Convection/Microwave Oven
Model #: PEB9159SJSS. Trim Kits are not interchangeable. This model is compatible with 27" Built-In Kit JX9152SJSS and 30" Built-In Kit JX9153SJSS (sold separately). We suggest viewing the Quick Specs for dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB9159SJSS_R2.pdf - Note: Model # JES2051SNSS is intended for countertop use. This model is not compatible with a trim kit. We certainly appreciate your loyalty! Keep in touch at GEAppliances.com. Sue
A:AnswerHello - Thank you for your interest; we are happy to help! The microwave JES2051SNSS is a countertop only model. It is not designed or approved for a built-in installation. There is not a built-in trim kit available for this model to ensure the correct venting of the unit. We are glad you checked. Olga
A:AnswerHi - Thanks for choosing GE Model JES2051SN4SS! This model is designed for countertop use. A trim kit is not available. Keep in touch at GEAppliances.com. Sue
A:AnswerHi dans - We certainly appreciate your loyalty! Model JES2051SNSS is designed for countertop use. This model is not compatible with a trim kit. If it will be used on a counter, JES2051SNSS (stainless/black) and PES7227SLSS (stainless/gray) are comparable. If your current model is installed with a trim kit, we suggest GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven Model #: PEB7227ANDD. Trim Kits JX7227SLSS (27" Stainless steel); JX7230SLSS (30" Stainless steel) are sold separately. We suggest viewing the Quick Specs for cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - Keep in touch at GEAppliances.com. Sue
A:AnswerHi Karen - Model:JES2051SNSS is designed for countertop use. This model is not compatible with a trim kit. We suggest viewing our selection of built-in capable models at the following link: https://www.geappliances.com/ge-appliances/kitchen/microwaves/?Type=Built-In - Keep in touch at GEAppliances.com. Sue
A:AnswerHi RickyT - GE® 2.0 Cu. Ft. Capacity Countertop Microwave Oven
Model #: JES2051SN4SS is designed for countertop use. This model is not compatible with a trim kit. You can view our selection of "built-in capable" microwaves at the following link: https://www.geappliances.com/ge-appliances/kitchen/microwaves/?Type=Built-In - Keep in touch! Sue
A:AnswerHello LD1987 - Thank you for your inquiry; we are happy to help! The microwave JES2051SNSS is a countertop only model; it is not designed or approved for a built-in installation. We are sorry to say there is not a compatible trim kit available for this model. We apologize for the inconvenience. Thanks for checking! Olga
