“Specs show: Case depth without door (in.) 30-5/8. Case depth less door handle (in.) 35 (Assuming this includes the door, but less door handle). Does this mean the door is 4 3/8" thick?? That is a pretty hefty door! Please clarify. Thank You.”
Answer This Question
1-3 of 3 Answers
The door tapers from outside to inside, so yes, with the rubber seal the inside of the door from front to the rubber seal (where the French doors open and meets the front of the fridge) is just over 4". Keep in mind the door is holding up 4 shelves inside on both sides. The outer width of the door where it meets each side is approx 3" wide. So it tapers from 3" to about 4" outside to inside width wise.
Sorry, there was a problem. Please try again later.Thank you for your response about the 4 inch door. However I have already measured the door on the 24.8 cubic larger fridge, and that door is only 3 inches. Same weight on the door as the 20 cubic feet. Very confusing as the smaller fridge should not logically not have a larger door than the larger fridge, I would imagine.
Sorry, there was a problem. Please try again later.Hi Patty- This is Sue at GE Appliances. Thanks for viewing! Yes, the Case Depth without door is 30 5/8" and Case Depth less door handle (includes door) is 35". We suggest to view the Quick Specs for all product dimensions at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=GNE25JMK_JSK_c2.pdf - Thanks for checking with us!
Sorry, there was a problem. Please try again later.