Hi kteddy - We certainly appreciate your loyalty! It takes approximately 7 seconds to fill an 8 ounce glass. An adequate cold water supply is crucial for satisfactory icemaker and dispenser operation on these models.
The water pressure must be between 40 and 120 psi (pounds per square inch). Pressures below 40 psi may cause a malfunction of the icemaker (i.e. producing hollow cubes or slow ice production). A slow water dispenser could be an indication of a clogged filter, kink in the supply tubing or a clogged saddle-valve. We suggest performing the following test if you suspect the filter is clogged (It's a general test, so results can vary): Dispense water from the dispenser (internal or external) into a large measuring cup for 20 seconds.
If the water is less than 13.5 ounces, the water flow is probably inadequate.
If the unit passes the test the dispenser is likely working properly. Take a look at the following links- REFRIGERATOR DISPENSER WATER FLOW TEST: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16873 - REFRIGERATOR - SLOW WATER FROM DISPENSER: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16239 - We hope this is helpful. Keep in touch! Sue