A:AnswerThis is a great replacement for your current microwave! You will need trim kit JX7227DLBB. Thank you for choosing GE Appliances for your home once again. -Kacie@GEAppliances
A:AnswerThis certainly is the correct replacement for your current microwave! You will need trim kit JX7227DLBB or JX7230DLBB, depending on the size of your cutout. Thank you for checking with us and choosing GE Appliances for your home again. -Kacie@GEAppliances
A:AnswerWe have model PCWK22U1WBB that needs trim kit JX7227DLBB. Thanks for checking with us and choosing GE Appliances for your home once again! -Kacie@GEAppliances
A:AnswerThe PEB7227DLWW model has been replaced by the PCWK22U1WWW. We recommend checking with your local retailer for availability and pricing. You will also need the appropriate built-in kit for this installation. -Vikki@GEAppliances
A:AnswerThe trim kit is not included with the microwave. The compatible trim kit options for this unit are: JX7227DLWW (White); JX7230DLWW (White). These trim kits can be found on Bestbuy.com by searching the part number. -Don@GEAppliances
A:AnswerWe encourage you to measure the actual opening you have available in your cabinetry. Going just by your microwave model number, we don't offer a microwave that requires that size opening. You might consider model PCWK15C1WSS and the 30" kit in stainless (JX9153SJSS).
The built-in kits consist of several parts that go inside the cabinet and are attached to the microwave. The kit in it's entirety is intended to create the airflow needed in the cabinet to allow the microwave to function properly. Any shortcuts could result in the microwave not performing properly. -Vikki@GEAppliances
A:AnswerThere was a running change in 2019, so the PEB7227ANDD is the model number for both the Stainless and Slate model. The trim kit will bring in the Stainless Color. The Stainless-Steel trim kits are JX7227SLSS or JX7230SLSS.
A:AnswerThis microwave comes equipped with a plug and cannot be hardwired. For more information, see the Electrical Requirements section on page 2 of the Installation Instructions, which can be viewed at the bottom of the Features tab on the product page of the Best Buy website.
A:AnswerYou will not be able to use your existing trim kit because they're specific to each model. The trim kits that's compatible with the PEB7227ANDD are: JX7227SLSS; JX7230SLSS.
A:AnswerWhile we offer several comparable replacements, we recommend using the mounting bracket and hardware that will be packaged with the new model. The new JNM7196SKSS would be a comparable replacement based on dimensions, capacity and features. Also, based on the model number of your existing microwave, the unit is not vented to the outside but rather is installed as an internal (recirculating) model. The JNM7196SKSS also comes from the factory set up for internal venting.
A:AnswerThe trim kit for this microwave is JX7227DLBB. We know you're going to love this beautiful microwave in your home. Be sure and check out the sensor cooking controls!
A:AnswerYou will not be able to use your current trim with this model or any other new unit that you purchase. Trim kits are specific to each model. This unit will make a great addition to your home. The compatible trim kits for the PEB7227DLBB are: JX7230DLWW/BB and JX7227DLWW/BB.
A:AnswerThe black color matched kits JX7227DLBB; JX7230DLBB are compatible with the PEB7227DLBB 230microwave. The JX7230SLSS in stainless is compatible with the PEB7227ANDD microwave. If you wish to use your existing JX7230SLSS kit with the black model microwave, you can do that.
A:AnswerYes, we can confirm that the JX7227SLSS trim kit is compatible with microwave model PEB7227DLBB. A PEB7227 model will work with any of the L series trim kits (JX7227*L, JX7230*L) including JX7227SLSS.
A:AnswerWe recommend taking a look at the PEB7227DLBB model, which has the same exact dimensions as your current unit: https://www.homedepot.com/p/GE-Profile-2-2-cu-ft-Built-In-Microwave-in-Black-with-Sensor-Cooking-PEB7227DLBB/302944121. For safety purposes, you will need a new trim kit for installation. The compatible trim kit for this unit is the JX7230SFSS: https://www.homedepot.com/p/Deluxe-30-in-Built-In-Microwave-Trim-Kit-in-Stainless-Steel-JX7230SFSS/204617405.
A:AnswerYou will not be able to use your existing trim kit with a new microwave. The compatible trim kits for the PEB7227DLBB are: JX7227DLBB (Black); JX7230DLBB (Black).
A:AnswerWe can confirm that this PEB7227DLWW model would make a great replacement for your prior built in microwave. However, we don’t currently offer a model that has the exact same dimensions as your prior model, so some modifications to the cutout space will be needed. -- We also recommend checking out model PEB9159DJWW which has convection cooking capabilities similar to your prior microwave.
A:AnswerThe trim kit includes the following parts included: Trim Frame, Screw Covers, Base Pan, Upper Bracket, Rail, Bottom Bracket, and Screws. For more information, see the Installation Instructions on our GE Appliances website by viewing the trim kit’s product page.
