Questions & Answers

Q: QuestionI need replacement for current GE model JEB1860DMBB 1.8 CF. 13 5/8 H x 24 1/8 W x 19 1/8 D. Will this model work as replacement. What kit will work. Thanks

Asked 5 years ago by AWR.

• A:Answer Hello AWR! Thanks for reaching out to us and for your loyalty to our microwaves. We're happy to have you as part of the GE Appliances family. We found that this microwave would be a good replacement for your current unit. The 27" trim kit is part number JX7227DLBB and can be found online at this link: https://www.bestbuy.com/site/ge-27-built-in-microwave-trim-kit-black/6083584.p?skuId=6083584 The 30" trim kit for this unit is part number JX7230DLBB and can be found online at this link: https://www.bestbuy.com/site/30-trim-kit-for-ge-profile-series-peb7227dlbb-microwave-black/6083598.p?skuId=6083598 We hope this helps! Emily@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionDoes the purchase of GE microwave PEB7227ANDD come with JX7227SLSS stainless steel trim kit?

Asked 5 years ago by JohnL.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer No, the trim kit is a separate purchase.

  Answered 5 years ago by KatbuilderVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionDo I need to buy an installation kit for this microwave? We picked this microwave up to install ourselves, but there was no installation parts included. We knew we needed to get a trim kit, but there is no base pan or anything to secure the microwave.

Asked 5 years ago by DerrellSC.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - White

• A:Answer Hi DerrellSC, thanks for your question! Based on page 1 of your installation instructions, all of the installation equipment would come with the microwave upon delivery. If you were not supplied this installation equipment, then we would recommend reaching out to your dealer to let them know about this. They may be able to assist with either getting the parts for you or exchanging the unit with one that has the installation equipment. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionMy existing cutout width is 28 3/8". The installation spec sheet shows a maximum width of 25 5/8. The instructions do not show screws being on the sides of the unit, only the top and bottom. Will my cutout work, or will I need to narrow it?

Asked 6 years ago by Steve4009.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer Hello Steve4009 - Thank you for reaching out about this excellent microwave. We are happy to help. Model PEB7227ANDD has only been approved for installation in cabinets up to 25-5/8" in width. We recommending contacting a local cabinet maker to inquire about options on shortening the width of the space. Please let us know if you have any more questions. - JB

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: Questionwe want model PEB 7227SLSS in stainless steel, but your website shows the color as gray. Doe "gray" mean stainless steel?

Asked 7 years ago by katybelle.

• A:Answer No. What you see is exactly what you get. The PEB is the built in cabinet model that requires the Trim Kit as an additional item which you can get the stainless steel color. GE does sell the PES model which is for counter top use in different colors.

  Answered 7 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionI need to replace a built-in GE Profile microwave model# JE2160BF01. Can you please tell me the closest model that is comparable in size, in color black? my present model is built-in. on the model that you recommend, will my trim kit fit it? Thanks.

Asked 7 years ago by Anonymous.

• A:Answer Hi - The comparable model is GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227DLBB. It is compatible with GE® Required 27" Built-In Trim Kit JX7227DLBB and GE® Required 30" Built-In Trim Kit JX7230DLBB. We suggest to view the Quick Specs document at the following link for more details including cabinet cutout dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - We certainly appreciate your loyalty! Sue

  Answered 7 years ago by GE Answers

  
  Helpful (1)Unhelpful (2)ReportAnswer this question

Q: QuestionHi, I am purchasing a PT7050SFSS and need a microwave with a side swing door to go with it. Could you recommend a model number and trim kit model number? Thanks!

Asked 8 years ago by Donna.

• A:Answer PEB7227SLSS is the model no for microwave JX7230SLSS is the model no for the trim kit for this microwave. Hope this helps. We just got it installed in November and love it.

  Answered 8 years ago by SmitaVerified Purchase

  • 
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have a 2019 GE Profile PEB7227DL1BB microwave that must be replaced. I see that you have PEB7227DLBB (no "1" before the BB). Is that the same model and will my current trim kit fit? This is the THIRD GE Profile microwave in 5 years!!!!

Asked 4 years ago by CAW122.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - White

• A:Answer Can't answer as I had a much larger Panasonic microwave-convection oven that lasted me 25 years. Only got GE because size closest and it was white.

  Answered 4 years ago by Sammi

  Helpful (0)Unhelpful (2)ReportAnswer this question

Q: QuestionWe are in the process of replacing a GE Profile model JE2160BF03 built in microwave and wonder which profile microwave you would recommend to replace the older model. We would like to not have to do major woodwork on the present cavity over our GE oven.

Asked 7 years ago by John.

• A:Answer Hi John- The comparable model is GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227DLBB. Trim kits are not interchangeable. It is compatible with GE® Required 27" Built-In Trim Kit JX7227DLBB and GE® Required 30" Built-In Trim Kit JX7230DLBB. We suggest to view the Quick Specs for cabinet cutout dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227DL_R2_17.pdf - You can also view the Quick Specs for model JE2160BF03 for comparison: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240350_je2160_bfcfsfwf_r2.pdf - We certainly appreciate your loyalty. Enjoy! Sue

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (2)ReportAnswer this question

Q: QuestionWe have a white built in GE JEB1860DM1WW Microwave. Dimensions are approx H 12.75" x W 23.5" x D (less than 24"). What can we use to replace this microwave? And do we need a new microwave shroud to go with it? If so, what do you recommend?

Asked 5 years ago by BuiltInReplacement.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - White

• A:Answer Please respond

  Answered 5 years ago by Naresh

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwhat is the replacement for the GE PEB7227SLSS microwave oven that has been disontinued?

Asked 6 years ago by jmas.

• A:Answer The link describes what GE is doing for built in microwaves. I think they should retain a Stainless model for built in installs with trim kits. The PES7227SLSS is the countertop only version and is still available. https://products.geappliances.com/appliance/gea-support-search-content?contentId=36888

  Answered 6 years ago by Captricky

  Helpful (0)Unhelpful (6)ReportAnswer this question

Q: QuestionI am replacing a JE1640WB001 White Built in microwave installed over a 30 " built in oven. Is the PEB7227DLWW my best option or do you have another suggestion? Also, what is the appropriate trim kit?

Asked 7 years ago by Bill.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - White

• A:Answer Hello Bill - this is Nancy at GE Appliances and we are happy to help you. Your current microwave trim kit required a cabinet cutout of 17-9/16" high x 24-1/8" wide. The PEB9159DJWW trim kit requires a cabinet cutout of 17-1/8" high x 23-1/4" wide. The PEB7227DLWW trim kit requires a cabinet cutout of 16-3/4" high x 25-1/2" wide. The PEM31DFWW trim kit requires a cabinet cutout of 15" high x 24-7/8" wide. Based on the cabinet cutout requirements, the PEB9159DJWW may be the best replacement. We hope this helps! Thanks for checking with us!

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (6)ReportAnswer this question