Is it true that this range requires a 240V/208V, 40-amp dedicated circuit and that the plug configuration is a 4-prong (4-wire) NEMA 14-50P plug? null

Question

GE Answers · Accepted Answer

You must use a single-phase, 120/208 VAC or 120/240 VAC, 60 hertz electrical system. If you connect to aluminum wiring, properly installed connectors approved for use with aluminum wiring must be used. Use only a 3-conductor or a 4-conductor UL-listed range cord. These cords may be
provided with ring terminals on wire and a strain relief device. A range cord rated at 40 amps with 125/250 minimum volt range is required. You can find more details located inside the installation instructions on page 2. This can be viewed by clicking the "Features" tab under the product image, then scrolling down the page that pops up until you see a link under "Installation Instructions."

“Is it true that this range requires a 240V/208V, 40-amp dedicated circuit and that the plug configuration is a 4-prong (4-wire) NEMA 14-50P plug?”

1-1 of 1 Answer