A:AnswerHello Todd. This is Lida with GE Appliances. Trim kits are model specific, so the old trim kit cannot be reused with the new PEB7226SFSS. The cut-outs are the same, so the new model with its trim kit will fit without modification of the cabinet. Thanks for checking.
A:AnswerHello johnniern - this is Nancy at GE Appliances and we are happy to help you. The internal cavity dimensions of this microwave are: 17" wide x 11-5/8" high x 18-7/8" deep. This microwave does have a light. It is located within the inside walls of the microwave oven so it is not consumer replaceable. Thanks for checking with us! We're glad you asked!
A:AnswerHi AG- This is Sue at GE Appliances. Thanks for your making GE Appliances part of your home! We certainly appreciate your loyalty! The built-in trim kits are not interchangeable. Microwave trim kits are designed to provide a built-in look while also providing air flow necessary to the microwave. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. PEB7226SFSS is compatible with OPTIONAL 30" BUILT-IN TRIM KIT JX7230SFSS or OPTIONAL 27" BUILT-IN TRIM KIT JX7227SFSS. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. Thanks for checking with us!
A:AnswerHello - this is Nancy at GE Appliances and I am happy to help you. Your current JE1860 microwave used a trim kit that required a cabinet cutout of 16-3/4" high x 25-1/2" wide. The PEB7226DFWW is a great replacement model, because the trim kit it is approved with requires a similar cutout dimension. However, you will need to use the new trim kit as they have changed over the years and the old ones are not compatible with the new microwaves. We appreciate you checking with us! Thanks for choosing GE Appliances!
A:AnswerHi Jake- This is Sue at GE Appliances. We certainly appreciate your loyalty! Microwave trim kits are designed to provide a built-in look while also providing air flow necessary to the microwave. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model (they are not interchangeable). PEB7226DFWW is compatible with OPTIONAL 30" BUILT-IN TRIM KIT JX7230DFWW or OPTIONAL 27" BUILT-IN TRIM KIT JX7227DFWW. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. You can also view the Trim Kit Installation Instructions for cutout and clearance requirements at the following link: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40727.pdf - Thanks for checking with us!
A:AnswerHi Tallyboy,
I am happy to help. It sounds like you might need an over the range microwave.
We no longer manufacture the 36 inch wide unit, but our 30 inch model will fit in the same space. You will want a model that offers an optional filler kit to fill in the 3 inches on both sides, so make sure the model you choose has that option. Thank you for checking with us.
Lisa from GE Appliances.
A:AnswerThere is a base for this oven, you can see it on GE website to obtain part number. I used my old installation kit and it worked fine, but only with certain ovens.
A:AnswerHi Kingsway- This is Sue at GE Appliances. Thanks for your interest! Monogram ZEB1226SHSS features a black case and the Profile PEB7226SFSS features a gray case. Monogram also features a Limited 5-year magnetron tube warranty (part only). PEB7226SFSS is compatible with Built-In Kits (Optional) JX7227SFSS (27") and JX7230SFSS (30"). ZEB1226SHSS is compatible with JX2127SH (27") and JX2130SH (30"). Thanks for checking with us!
A:AnswerHi Anshul- This is Sue at GE Appliances. Thanks for your purchase. The instructions for installation are included with the optional Built-In Trim Kits. This model is compatible with OPTIONAL 30" BUILT-IN TRIM KITJX7230SFSS or OPTIONAL 27" BUILT-IN TRIM KIT JX7227SFSS. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. You can also view the Installation Instructions online: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40727.pdf - Thanks for checking with us. Enjoy!
A:AnswerHi
I am happy to help. Model PEB7226 will not work in an over the range installation. The models below will fit where your exsisting unit is located and also offers the same mounting brackets:
http://www.bestbuy.com/site/compare?skus=1751411,5291514,5291527&productString=1219062810745*bb5291514*bb5291527&url=%2Fsite%2Fsearchpage.jsp%3Fcp%3D1%26searchType%3Dsearch%26_dyncharset%3DUTF-8%26ks%3D960%26sc%3DGlobal%26list%3Dy%26usc%3DAll%2520Categories%26type%3Dpage%26id%3Dpcat17071%26iht%3Dn%26seeAll%3D%26browsedCategory%3Dpcmcat748301803023%26st%3Dcategoryid%2524pcmcat748301803023%26qp%3Dmicrowavetypesv_facet%253DMicrowave%2520Type~Over-the-range%255Ebrand_facet%253DBrand~GE%255Eprimaryfinishcolor_facet%253DPrimary%2520Finish%2520Color~Stainless%2520steel
I hope this helps. Thank you for checking with us.
Lisa from GE Appliances.
A:AnswerHi Karen- This is Sue at GE Appliances. We certainly appreciate your loyalty to our Profile Series! Yes, PEB7226SFSS is the replacement for PEB2060SMSS. The microwave built-in trim kits are not interchangeable. You will also need to purchase OPTIONAL 30" BUILT-IN TRIM KIT
JX7230SFSS or OPTIONAL 27" BUILT-IN TRIM KIT JX7227SFSS. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. Thanks for checking with us!
A:AnswerThis microwave is being vented in the back. I am thinking you may want to look into over-the-stove microwaves to see how they are being vented as heat is given off when the microwave is used. There must be an appropriate mean for the heat to be vented off.
A:AnswerHi Todd- This is Sue at GE Appliances. We are excited to hear of your interest in our Profile Series Microwave! The optional 27" BUILT-IN TRIM KIT JX7227DFBB is required for built-in installation. The cutout height requirement is 16 3/4". We suggest to view the Installation Instructions for cutout and clearance requirements at this link: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40727.pdf- Thanks for checking with us!
A:AnswerHello steve - this is Nancy at GE Appliances and I am happy to help you. The PEB7226DFBB can be built into the cabinet using one of the following trim kits: JX7227DFBB (for 27" cabinets) or the JX7230DFBB (for 30" cabinets). The cabinet trim kit required cutout dimensions are: 16-3/4" high x 25-1/2" wide. I hope this helps! Thanks for checking with us!
A:AnswerHello Keith - this is Nancy at GE Appliances and I am happy to help you. Your local dealer is the best source for product availability in your area. They will be able to assist you with local availability and all feature information on our appliances. I hope this helps! Thanks for checking with us!
A:Answernot sure but you should check the manufacturers web site or call them and get the part number. then you'll be able google it on the internet . Also sears.com has all kinds of parts
for many brands and you should check there for pricing.
A:AnswerHi-this is Sue from GE. We appreciate your interest!
Yes! We offer two built-in trim kits to use with model PEB7226SFSS.
GE - 30" Trim Kit
Model: JX7230SFSS
SKU: 2877228
http://www.bestbuy.com/site/ge-30-trim-kit-for-most-ge-2-2-cu-ft-microwaves-stainless-steel/2877228.p?id=1219080296775&skuId=2877228
GE- 27" Trim Kit
Model: JX7227SFSS
The GE Parts & Accessories Store can be reached at 1-877-959-8688.
We hope this is helpful!
