How wide is the tv stand in back and in front. We got the 8.5 depths.
The 4 inch height but can’t find just the stand width size.

We need to secure the stand to a9 inch ledge. Is there a away to screw it in? Will I need to bracket it down? null

Question

How wide is the tv stand in back and in front. We got the 8.5 depths. 
The 4 inch height but can’t find just the stand width size. 

We need to secure the stand to a9 inch ledge. Is there a away to screw it in? Will I need to bracket it down? null

Seapurr43 · Accepted Answer

I'll try to answer my own question. 

The stand is basically a bent hexagon. 8.8 depth edge to edge. 
The peak where it attaches to the tv is 26.75
The width of footing is 22.55
These numbers represent the absolute smallest foot print. 
Now the good news. There are two lag bolt holes under where the tv would attach to the stand. I would go no less than 3 inch because the stand is 2.25 inches high.
The lag holes are 24.5 inches apart so you will need at least 28 inch width base to secure the tv if using only the stand like I did. 

The issue is that you need to secure the stand. Then put the tv on the stand. Then attach tv to the stand. Because the lag holes are under the set. 

Cheers. Great tv.

solopolo · Answer

The bottom of the stand measures 9" deep by 23" wide.

Cesar · Answer

The base us 22 1/2 inches front and rear.

“How wide is the tv stand in back and in front. We got the 8.5 depths. The 4 inch height but can’t find just the stand width size. We need to secure the stand to a9 inch ledge. Is there a away to screw it in? Will I need to bracket it down?”

1-3 of 3 Answers