“Without the base, how high up the back are the VESA mounting holes on the 65in C1 OLED? I'd like the measurements so I can set up my wall mount prior to my TV arriving.”
Answer This Question
1-3 of 3 Answers
My assumption will be that you've already checked to see which type VESA you need, 300mm x 200mm. Mine is on a stand, which blocks being able to measure with precise accuracy because I also have cabinetry on both sides, barely allowing my head to fit behind. But if really close is good enough, best I can measure , the bottom holes (2) are approximately 6 1/2" from the bottom of the TV, and the top holes (2) are approximately 14 1/4" from the bottom. That will be mounting in the compartment at bottom of TV housing all the major electronics. Starting at approximately 15 1/4", viewing from the back, is the extremely thin TV display screen. In other words, the mounting is on the bottom approximate 1/3 of the height of the entire TV specs. Hope this helps and is clear enough.
Sorry, there was a problem. Please try again later.I did a quick reverse engineering using the back view of the TV (65 in C1), according to my calculations the distance from the lower bottom vesa screw to the bottom edge without the stand should be approximately 5.5 inches.
Sorry, there was a problem. Please try again later.I do not have access to the CAD drawings to provide this measurement. Please reach out to our support team via private message on Facebook @LGUSSupport or call at 800-243-0000. Please be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane
Sorry, there was a problem. Please try again later.