A:AnswerHello and thank you for your question! The KX-TGD832W cannot make calls using voice command. You can answer incoming calls by voice commands but you cannot make outgoing calls. Hope this helps! - S
A:AnswerHello! The phone system uses DECT 6.0 technology, which encrypts the communication between the base unit and the cordless handsets. The encryption prevents unauthorized listening or eavesdropping on your calls. -C
A:AnswerHello. The base units of two systems that have the same model will be compatible. However, we do not recommend using them on the same line, due to issues caused by interference between the two units. -C
A:AnswerHello Eileen! The manual is available online, on our official Panasonic Website where you can look it up based on the model number of the phone system. Incoming calls can be blocked by pressing Call Block while the phone rings or you can add them manually to the call block list. Please note that the call block list might be full and the phone cannot block any more number. In that case we would recommend emptying the list and blocking the new spam calls. - S
A:AnswerHello Bob! The telephone comes with a supplied telephone line cord which needs to be connected to a single-line telephone jack. As the phone system was not tested with this service, only with a landline connection, we encourage you to check directly with the telephone service provider for information. - S
A:AnswerHello! This phone system does not have a call forwarding feature built-in. It is compatible with the forwarding service which can be set up by your service provider. Hope this helps! - B
A:AnswerHello! We appreciate the question. The part number for the rechargeable batteries is HHR-4DPA. Please use only rechargeable Ni-MH batteries AAA (R03) size. Hope this helps! -C
A:AnswerHello! You can turn the feature off by pressing MENU on a handset, then the key "#" and enter code 162. Choose the Off option, press SAVE and then the OFF button.To turn it off on the base unit, you meed to press MENU on a handset as well, then the key "#" and enter code *162. Choose the Off option, press SAVE and then the OFF button, Hope this helps! -C
