“do you need a licensed LP to put conversion kit on or is it do it yourself?”
Answer This Question
1-4 of 4 Answers
The parts to convert to LP comes with the appliance and you should be able to change them yourself.
Sorry, there was a problem. Please try again later.Greetings! Thank you for reaching out and we hope you are in good health. We appreciate your interest in Samsung home appliances, specifically the Samsung - 5.8 Cu. Ft. Freestanding Gas Convection Range with Self-High Heat Cleaning - Stainless steel. It is highly recommended to have a qualified LP installer convert the range before attempting to operate the range. I have included the installation guide link below. Please click on the link and turn to pages 18 and 24 for guidance in converting from natural gas to propane. https://downloadcenter.samsung.com/content/EM/202011/20201113101642382/Install_NX58H56_DG68-00524A-13_EN-MES-CFR_201013.pdf I have also included the user manual link below. Please click on the link and turn to page 80 as suggested in page 24 of the installation guide. https://downloadcenter.samsung.com/content/UM/202103/20210308173903855/NX58H5_Series_AA_DG68-00526A-15_EN.pdf Please feel free to communicate with us through the channels below if you have additional questions. 1. Facebook Messenger: http://m.me/samsungsupport 2. Twitter: https://twitter.com/messages/compose?recipient_id=18768513 3. Samsung Community: https://us.community.samsung.com/t5/Samsung-Community/ct-p/us 4. Samsung Care: 1-800-SAMSUNG (726-7864). Your reference number: 1144300715 Leo
Sorry, there was a problem. Please try again later.Yes, you need an LP conversion kit if you use liquid propane. Found it easiest to call my propane provider to install new valve hookup required.
Sorry, there was a problem. Please try again later.You can install all on your own. Make sure to put gas/gasket adhesive around both ends of where you are fastening the hose and also check for leaks when done with a spray you can buy at the store or just some water and dawn dish soap. If you see bubbles when you turn gas on, turn gas off and check the hose or tighten down more. Make sure to turn gas off before putting new gas lines on as well.
Sorry, there was a problem. Please try again later.