setting alarm Need help setting alarm. Hasn't worked. Went on Sony chat ands they said to push hour and minute button. Don't see that!

Question

Chris · Accepted Answer

It's on the back.

Sabathine · Answer

There are two alarm buttons (turn off / beep / radio). Below each of the two alarm buttons there are plus and minus buttons that set the alarms on each side. The alarm needs to be on beep or radio before the plus and minus buttons will set alarm times. All of the buttons are on the top of the alarm clock.

Answered by Sabathine 9 years ago

walleye60 · Answer

All the button are on the top

emm2395 · Answer

Choose alarm A or B
choose buzz or radio (if you choose radio set the station)
the alarm time appears for a few seconds, then A or B appears on the display. It will not appear if the switch is set to off
Press set alarm time + or - repeatedly to set the desired time while the alarm time appears on the display. While setting the alarm time A or B flashes on the display. When the alarm time setting operation is complete, the clock display returns after a few seconds and A or B changes from flashing to fully lit.

Kerry · Answer

Move the alarm, either one, to radio or alarm position. The alarm time that is already set will flash only a few times. While the alarm time is flashing you must quickly push the + or - button in front of the alarm button to scroll to the desired time.

Answered by Kerry 11 years ago

lizmari · Answer

Not sure if you figured this out yet? You just turn the alarm on (whichever one you want to set, A or B), and press the minus or plus button located directly below it.

Marlisa · Answer

I had same problem but by using the two tone signal and not moving too fast, I accomplished my mission. I tend to move too fast.

SonyListens · Answer

Hi lynn, Please check this manual for the steps on how to set-up the alarm: https://docs.sony.com/release/ICFC1T_EN_FR.pdf. Thanks, Dave

“setting alarm Need help setting alarm. Hasn't worked. Went on Sony chat ands they said to push hour and minute button. Don't see that!”

1-8 of 8 Answers