A:AnswerHi PeteD, Thanks for your inquiry. Unfortunately, this unit can only receive audio content from a
WALKMAN®, smartphone, or tablet that has a Bluetooth function and listen to it via this receiver. Hope this helps! -Sam
A:AnswerHi Xx41sunjpg, Thanks for your inquiry. Unfortunately, this unit doesn't have a built-in cassette recorder to record into a CD. However, it has multiple AUDIO IN ports to connect your audio/video devices. Hope this helps! -Sam
A:AnswerHi APReichard, Thanks for your inquiry. Unfortunately, you cannot connect a wireless speaker to the unit. We recommend connecting wired speakers to the speaker ports of the unit that are within the impedance rating of 6 to 16 ohms. Hope this helps! -Sam
A:AnswerHi nirsighted, Thank you for your interest in the STRDH190. Unfortunately, no. An equalizer/preamp needs to be connected to the tape monitor loop on an AV receiver in order to operate. The current line of Sony receivers does not have a tape monitor loop. For this reason, it is not possible to connect an add-on equalizer to current Sony AV receivers.
NOTE: Most Sony receivers feature a built-in Digital Signal Processing (DSP) Equalizer. The addition of an equalizer is not needed and would provide no additional benefit to the overall sound output of the receiver.
Regards,
Sam
A:AnswerHi nirsighted, Thanks for your inquiry. Yes! your speakers will work perfectly with the receiver since the STRDH190 requires connecting speakers that are within the impedance rating of 6-16 ohms. And yes, you can connect your TV to the RCA audio IN port of the receiver. Hope this helps! -Sam
A:AnswerYes there is a digital switch reached via the remote. Directions to this is in the manual and an easy setup whether you are using 8 or 6 ohm.
Most functions are through remote.
Just make sure ohms for speakers match ohm you set.
Of course be sure speakers polarity plus and negative are hooked up correctly.
Is this unit over the top load? No but plenty load through good speakers. I replaced basically the same unit (10 years old) to get Bluetooth. My old one will find its way to workshop. This one is for my painting studio.
Plenty of hookups for CD and turntable. It also has preamp built in.
For the price it is very nice.
If you want something for surround sound for tv and movies I would look for specifically designed unit. This one is really nice for music.
Bluetooth pairs easily.
Hope this helps. I know my granddaughters were able to connect with no issues. I had to read manual.
A:AnswerHi there, Thank you for your interest in the STRDH190. You can connect your TV to the RCA audio IN port of the receiver and pair your phone to the receiver via Bluetooth connection. However, there are no HDMI inputs to connect your Roku device. I would recommend connecting your Roku to your TV instead. Hope this helps! -Sam
A:AnswerHi Dabis, The speaker output can only be switched to mono when listening to FM tuner (Refer to the link below for instructions.). However, you cannot switch the speaker output when listening to Bluetooth, or the Audio devices that are connected to Audio IN port.
https://www.sony.com/electronics/support/res/manuals/4726/f63b8edb2b154409daa55875111f95e4/47269071M.pdf (page 27).
Regards,
Sam
A:AnswerHi Nickyg, Thanks for your inquiry. Yes, this unit should be able to connect to your Turntable via Bluetooth. Please make sure that your turntable supports the following profile:
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.6 (Audio Video Remote Control Profile)
Regards,
Sam
A:AnswerHi Jack, Thanks for your inquiry. This unit has a Bluetooth Specification version 4.2. If you ever experience a delay, or if the sound skips, please follow the guidelines below:
• The receiver and the BLUETOOTH device are too far apart.
• If there are obstructions between the receiver and your BLUETOOTH device, remove these or move the receiver and/or device avoid them.
• If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away.
Regards,
Sam
A:AnswerHi Binky, Thank you for purchasing the STRDH190. First, make sure that the speakers are within the impedance rating of 6 to 16 ohms. SPEAKERS A/B function is not available when headphones are connected, so make sure to check whether there's a headphones connected to the headphone jack of the unit. Also, you will need two pairs of speakers for the SPEAKERS A/B function to work.
If you are unable to resolve your concern, please email us at [email protected] with the following details:
Name:
Bestbuy Username:
Model Number:
Issue:
Telephone Number:
Sincerely,
Sam
A:AnswerHi eldiener, Thank you for your interest in the STRDH190. Unfortunately, using Bluetooth adapters or transmitter is not recommended as we cannot guarantee its operation. Hope this helps! -Sam
A:AnswerHi Realeza, Thanks for your inquiry. Yes, this unit will work with two pairs of speakers. Just make sure that the speakers are within the impedance rating of 6 to 16 ohms. -Sam
A:AnswerHi there, Thanks for your inquiry. Unfortunately, this unit doesn't have a wattage indicator. The dial/knob on the front panel controls the volume of the receiver. However, the power output of the unit is 90 watts per channel. Just make sure to connect speakers with a nominal impedance of 6 ohms to 16 ohms. Hope this helps! -Sam
A:AnswerHi FJ, Thank you for your interest in the STRDH190. Unfortunately, this unit doesn't automatically turn on when other devices/inputs turns on. If you're looking for this feature, I would suggest checking out our other AV Receiver models such as the STRDH590, STRDH790, and STRDN1080. -Sam
A:AnswerHi sueq, Thank you for your interest in the STRDH190. Yes! You can definitely hook up your CD player, Turntable, and two speakers to this unit. -Sam
A:AnswerHi WWn, Thank you for your inquiry. Yes, it will remember the paired Bluetooth devices in this unit.
Note: You can pair up to ten Bluetooth devices to this unit.
You don't have to repeat the pairing procedure once you've established a Bluetooth connection with your Bluetooth devices (e.g phones, Walkman, tablets). You just have to turn on the Bluetooth on your Bluetooth devices and select the Bluetooth input of the receiver and they should automatically connect. -Sam
A:AnswerHi Momobary2122, Thanks for your inquiry. Unfortunately, it is not dual voltage compatible. The power requirements of this unit are AC 120V for UL cUL AC 110-240V for others. This means, if you purchased the receiver from the US or Canada, it will be AC 120V, and receiver purchased outside of the US or Canada is AC 110-240V or dual voltage compatible. -Sam
