1-2 of 2 Answers
There is a wall mount bracket that supports the bottom of the back of the unit (unit drops into two slots and unit pivots up into place). There is an installation template and at least two holes need drilled. 2 x wood screws into studs or 2 x lag bolts into drywall hold the bracket in place. If you have the same brand and size you "may" not need to replace what you have. The front is held in place with two long screws which need holes drilled in the bottom of the overhead cabinet (template for these too). There is a third hole required in the bottom of the overhead cabinet for the plug to pass through (you need a standard 110V three prong outlet in the overhead cabinet). If you are replacing a unit it will be there.
Sorry, there was a problem. Please try again later.Dear Customer: Please follow the link below to view the installation instructions for this over the range microwave. Reference page 8 on mounting: http://www.whirlpool.com/digitalassets/WMH53520AS/Installation%20Instruction_EN.pdf Hopefully this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool appliances!
Sorry, there was a problem. Please try again later.