How to replace the water filter on Whirlpool Fridge model WRB322DMBM & where is it located? Thank you. null

Question

J78039 · Accepted Answer

There is no internal water filter. You need to install an in-line filter between the refrigerator and your water inlet.

Answer

Look at the front base of your Fridge with freezer door open,

Handy8 · Answer

The plastic cover won’t go back on. Looks like plastic tab is past opening!

CommunityAnswer · Answer

The filter is located in the upper right-hand corner of the refrigeration compartment. The process for changing the filter is as follows:
1. Turn filter counterclockwise to remove.
2. Remove sealing label from replacement filter and insert the
filter end into the filter head.
3. Turn the filter clockwise until it stops. Snap the filter cover
closed.
4. Flush the water system. See “Water and Ice Dispenser(s).”

WhirlpoolTeam · Answer

Hello! The water filter is located in the upper right-hand corner of the refrigerator compartment. IMPORTANT: Air trapped in the water system may cause water and filter to eject. Always dispense water for at least 2 minutes before removing the filter or blue bypass cap.
1. Turn filter counterclockwise to remove.
2. Remove sealing label from replacement filter and insert the filter end into the filter head.
3. Turn the filter clockwise until it stops. Snap the filter cover closed.
4. Flush the water system. See “Water and Ice Dispenser(s).”
NOTE: The dispenser feature may be used without a water filter installed. Your water will not be filtered. If this option is chosen, replace the filter with the blue bypass cap.

“How to replace the water filter on Whirlpool Fridge model WRB322DMBM & where is it located? Thank you.”

1-5 of 5 Answers