“After having the door reversed, how do I go about removing the nameplate? Will the delivery men do that for me and attach a new nameplate after reversing the door and removing the original nameplate?”
Answer This Question
1-2 of 2 Answers
The name plate is stuck on the door like tape and does not need to be moved. Now, if you notice on top of the door there is a cap covering the top door hinge and on the other side there is a hole where the hinge will be slipped into the door. Open the door and look at the lower side of the opening and you will see three screws. These screws will be removed and the bottom hinge will be installed in this location. The door and hinges will be removed and the bottom hinge will be will be installed on the fridge. The top hinge will be placed in that hole in door and the top hinge will be installed on the fridge to secure the door and the cap will be placed on the top hinge to cover it. Now they will move the handle. There are two plastic screws on the front of the door opposite side with the handle. These plastic screws will be removed along with the handle. Once the handle is removed the remaining two screws that held the handle on door are removed and placed in the holes where the plastic screws were. The handle will be installed over top of those screws. The plastic screws will then be placed in the holes were the handle use to be to cover up those holes. The screws that were taken out to install the bottom hinge will be placed in the screw holes are where the bottom hinge was removed. Now the job is complete.
Sorry, there was a problem. Please try again later.Please reach out to Best Buy Customer Care at 1-888-237-8289 for further assistance. We hope this helps.
Sorry, there was a problem. Please try again later.