“What new parts or hookup needs do I need for this? Can the guy who is going to install bring What I need?”
Answer This Question
1-2 of 2 Answers
If you have an existing electric range the same width as the new range, their shouldn't be any problem. They have to evaluate the electric outlet you have as there are two types, and they bring both types with them as the oven doesn't come with one installed. In my case, they were able to transfer the plug on my existing range so I didn't have to purchase another plug. If they can use the existing plug, just return the one you may have pre-purchased. Also, before they install, evaluate the new range for any dents or scratches. They also install an anti-tip plate which is a safety device that goes around the back leg of the stove. They also tested the oven to make sure all the burners and oven work. It only take about 20 minutes. They took the old stove away for a $15 dollar fee. They did a very good job.
Sorry, there was a problem. Please try again later.Pat, if you are using a power supply cord kit, you will need a cord should be rated at 250 volts minimum, 40 amps or 50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm) diameter connection opening and must end in ring terminals or open-end spade terminals with upturned ends. Hopefully this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool appliances!
Sorry, there was a problem. Please try again later.
