Customer Ratings & Reviews

If you own a ryzen cpu this will be more than enough to cool it. If you get an intel cpu that's the i7 or i9 you will not be happy with this cooler. Intel needs 240mm or even 360mm water cooling. I paired this up with my ryzen 5800x and got it up to 4.8ghz.

Its okay, it works like its supposed to but it was a pain to install but i got it

If you are NOT overclocking, this cooler looks great and is working well with my AMD Ryzen 9 5950X. Overclockers may want something more substantial but for stock AMD installations this looks good and does the job.

Got for an older Intel X i7-6950X 10 Core 3.00GHz LGA 2011-3 this is a 160 Watt CPU and so far this work's great So far I have had no issues with keeping my CPU cool. I run it on a stand with no case, Its loud but even I don't run it all the time.

Gets the job done but I would save your money and buy something better if you are eventually planning on buying or if you already have a Ryzen 7 or 9 equipped on your build. I use to have a Ryzen 5 2600 and upgrade to a Ryzen 7 2700x. Still does a decent job but there are better air coolers that will give you better performance.

Strange mounting but very good fan overall. Love the rgb

This CPU cooler works great. It installed easily and cools well. I used it to replace an AIO watercooler whose pump failed. The only reason I knocked a point off the rating is that the fan is a just barely loud. I am extremely sensitive to fan noise and I suspect most people would not notice the noise increase.

Bought this after buying a Prebuilt Cyberpower PC due to stock cooler being not so great. Worked like a charm after I bought this one. Easy enough to install. 10/10 would recommend.

First time builder with a limited budget so i picked this cooler master up. this thing keeps the cpu cool and with the option to add an additional fan I made it a super cooler master. all the needed hardware is inside the box excluding the second fan...

As a cooler this thing is 5 stars. It dropped my idle temps about 20 degrees and reduced my gaming temps from almost 90 to about 75 max. Definitely worth grabbing one for a Ryzen CPU. The reason I removed 1 star is because the fan is single LED, non-diffused. My PC sits on the floor next to me and you can clearly see the LED and its actually a bit distracting.

I was able to fit this on my Ryzen 5800x in my NR200p with a small modification. (if you take off the top peace of metal you can remove the plastic cups that sit on the tips of the heat pipes giving you that extra 1-2mm you need.

Thing is big! Make sure you plug in your 8-pin for the CPU before you mount this bad boy or you'll have to take it off again! Keeps the CPU pletny cool. Bought the matching fan to make it push/pull.

Been running for 6 months in new build. No issues with keeping it cool while gaming or doing work. Currently using on board graphics as well and has no issues. Likely picking another one up for a water cooled PC that is going.

Upgraded from my stock cooler on ryzen 5 3600 and now i max out at 70° instead of 90° when playing games when i was installing it to the bracket the screws werent reaching the standoffs so i had to improvise with the motherboard washers.

Great CPU cooler especially for the price. Works as expected.

Cool Good purchase! No problems after install. I have no diagnostics as far as I could tell. I intend to install a second fan on the back. There only one in the front.

I needed a replacement cooler for my CPU, I was getting temps of 60-70 under no load and 90 or more under load. Putting this on it went down to 35 under no load, and hovers around 45-50 under load. Much more a normal range. Bit of a pain getting the led to work but that was mainly because my motherboard does not have a build in led header for the fan. Build quality feels solid.

My Cooler Master - Hyper RGB Black was a fun build, that got paired up with a Ryzen 5 3600X married to an x370 SLI Plus RGB w/ 24gigs of DDR4 @ a phenominal 3333mhz!!! This puppy is a bit hefty and does add some undesirable weight and at times the wires just weren't quite the length needed for a full ATX using an akward mobo, but it came out nicely and I cant really complain.

This Product works to perfection. Does everything it says it supposed to (as it should) and performs great. The look of this part inside my PC is very cool to look at and I love that I can change the RGB settings so easily with the provided controller.

Its Coolermaster great brand long history with there stuff. I have this on a 5600x does its job. Got this one for its dark tone. Does what it needs to do. There are better ones for job but this is bang for buck and better then stock.