Customer Ratings & Reviews

enclosure is easy to use and accepts all SSDs. comes with all necessary hardware

Great support for my ssd. Easy installation for my ssd. I reccommended .

Great value. Updating old machine to a new SSD boot drive. Easy to install and included screws was nice. Actually bought another one or another upgraded machine.

My new ssd drive was easy to mount in the enclosure but the enclosure was a little difficult to mount in the computer case maybe because the computer case is more than ten years old and the mounting holes do not line up precisely.

I bought a new computer that came with a 2 tb mechanical drive which I didn't want to use so I replaced it with 2 SSDs and this was perfect for them both. Hardware was included for the drives AND for the enclosure. I had both drives installed and the case shut in 5 minutes!

Item received in good condition and has been installed. It worked as indicated to support smaller size hard drive. Replaced 3.5 drive with smaller physical size SSD. Bracket made the change out seamless.

An ingenious and value-priced solution for installing small drives in larger bays. The instructions could have been better. Also the screws required for SSDs are quite small, so you will want to have a miniature screwdriver with magnetic Phillips bits.

SSD's don't put out much heat so if your are looking to upgrade your system or simply add more storage using this Corsair Dual SSD Mounting Bracket is a no-brainer. I have installed many of these in PC's and Mac alike and they work great. The only trouble you may run in to is the fact that if your system requires the SATA ports to line-up exactly like a 3.5" drive than you will want to get a 2.5" to 3.5" SATA Drive Adapter Caddy. This will not work in Hot-Swap Server Applications

This was a needed item when I went to upgrade my mechanical sata drive to an SSD. The SSD drives are typically smaller, and unless your computer case has a place to mount an SSD drive (mine didn't) you will need a mounting bracket, such as this one. The bracket will let you mount an SSD drive in a standard-sized drive bay.

It does its job and holds the new hard drive in place.

Great enclosure if you need to install a few SSD's in a smaller case. The only issue is that the SSD's are so close together, you will need cables that are more flexible than what mine are. Other than that it works fine.

I have 2 860 evo ssd in my sff pc, so what i did was bought this to house it in the normal hdd caddy and it work so now i have a boot c drive and storage D drive with put using external unless i want more this works

This bracket/enclosure worked great in my Dell XPS desktop machine. The screw holes lined up perfectly with the Samsung 1TB SSD that I purchased and it fit neatly underneath my existing hard drive.

A true form replication of 3 1/2" HDDs for a 2 1/2"SSD. As the dimensions of desktops get smaller, not sure how doable it is, but considering the smaller size of the SSDs it would be great to have the frame smaller while still maintaining the mounting screw positions as those for a 3 1/2" HDD to make installation easier. The inclusion of ALL the necessary screws is a big PLUS.

When my desk top computer's hard drive needed to be replaced, I chose a solid state hard drive as the replacement. This item is used to install the new drive in the same location as the old drive. It does it's job and the new drive was mounted without any complication.

If your pc has an empty 5.25" bay, this product is a great way to add 2 ssd's top your system. This is handy if you have run out of mount locations or adding a couple if your prebuilt system was lacking said locations in the first place.

It works fine and accepts the SSD. The only trick was getting the tiny screws started. Be careful not to cross thread them. I put this into my Dell Optiplex 380 with no problem. Screws are included.

Easy to install. Came with all of the necessary hardware and fit well inside of a prebuilt pc.

While many newer cases come with dedicated spots for mounting SSDs, if you're adding an SSD or replacing an older hard drive in an older case, this bracket will do the job to mount your new SSD (or 2) in the old spot.

I bought this to add a Crucial - MX500 1TB 3D NAND SATA 2.5" Internal Solid State Drive to my XPS desktop. The drive fit perfectly into the enclosure and that fit perfectly on to my XPS harddrive bay.