Customer Ratings & Reviews

very crammed and definitely can’t fit big graphics cards with aio coolers

Very small tower corsair failed on this one i returned it

Not happy with the Support. Case is 3 weeks old when 2 of the fans have bearing issues. called support just to be told i have to purchase the replacements and mail in the old to get a refund? ill pass on this brand from now on. I would post a video but it only takes photos.

Purchased online what appeared to be new, beautiful, upgrade of machine to replace my HP Omen. After 9 days of waiting (shipping and GS check in and set up) picked up machine took home to learn machine is dead the LED lights and power button lights won’t turn on. Basically, a brand new dead no power PC.

This case is alright if you're not going to be adding any liquid cooling it doesnt fit the top or front of the case. Also trying to manage the cables near the power supply is a nightmare. The case is going to end up being returned by me.

I got this because I didn’t want a large full size tower and the small form factor cases are not only expensive but tend to run a bit hot, so this was a great middle ground for size and thermals. Construction is sturdy and very professional, like every other Corsair case I’ve ever used or seen. Filters are fine enough to catch the majority of particles and very easy to remove and clean. Building in it was for the most part extremely easy as even though it is compact, it was well thought out as to placement of most access holes for Routing cables etc. the only complaints I have are that the mounting standoffs are about 1/2” too high to comfortably mount some larger fans or a radiator easily, and that the included fans are not PWM so they run faster than they really need to, creating noise that certainly isn’t necessary. I swapped the fans out for some Corsair LL series fans I already had which made it virtually silent. I do feel the price is a bit high however it is significantly cheaper than other cases that I would classify to be the same size and quality, so that’s ok. I just think all these smaller cases are overpriced, it’s not a knock on this particular case. Less material should mean less cost, but that has not been the case for smaller cases I have noticed. I would highly recommend this case to anyone looking for a small footprint that can still house a great gaming system!

Case it's is great. I 1 starred this cuz the dang fans only lasted 5 minutes before dying. But while the fans did work they did an excellent job and had nice appearance....

dust filter on the front of the computer case is flimsy and sags into the fan making a whiring scratchy noise.

Front fans spin but out of the three fans only one rgb works. I really do not want to re-do all the work. Any ideas?

Some much noise coming up from this case and fan. So I would not recommend

Honestly Corsair, you had one thing holding me back; the size. This case is great and I highly recommend it if you're air cooling. Because of the smaller size, it was much harder to cable manage and fit my AIO (240mm H100i elite capellix) and make sure the ram (Gskill Ripjaws) fits. I really like the high-airflow and overall aesthetics of it. Another problem, the grommets are quite painful to route cables through, often times taking the rubber off entirely due to the tight squeeze. I'll buy the 4000x RGB and reevaluate what I liked about that in that review about the 220t.

Great case. Wonderful airflow and lovely compatibility with other Corsair products.

For first time PC builders, this is an okay case. The cable management leaves a lot to be desired, and one of the power buttons shorted out on me less than a year after building my PC, so I had to switch the cables around.

I really enjoy this case. Some things I was skeptical about when I first bought this case; 1) Can it fit a 360mm AIO - yes it can, in fact I have a full length EVGA 1660ti in the case too, and the radiator can still run a push/pull configuration with the Kraken x72 (be it, I had to order a slim fan for the middle fan slot.) 2) Cable management would be a pain - it is, this case doesn't offer a huge area in the back for cables to be routed, however, they do offer a good bit of anchor points so you can tie the cables down. I spent too long trying to manage my cables, being that there's a 360mm radiator in there, and an 850w power supply, there was very little room left for PSU cables, so they bunch up at the bottom. If I were to do this build again, I would go with custom length PSU cables, probably 200-400mm depending on the cable. I have three case fans blowing out, one in the back and two up top (yes they fit, even with the 360mm AIO. All in all I am very impressed with this case! I would definitely recommend this!

This case looks amazing. The front fans have so much customization in the ICUE software. The top panel looks kind of bad in the product photos, but it looks great in real life. It has plenty of space for cable management. The only problem is that it doesn't come with an exhaust fan.

PROS - Solid Durability. Fans that are included are nice and quiet, and the iCUE hub can support up to 6 fans in total. Two 120mm fans can fit on the top, or a 2 fan AIO Cooler could also. The metal on the front looks amazing especially with the RGB fans spinning. Each fans lighting can be individually customized with the iCUE program. CONS - Power Supply area is quite tight, The Hard drive bay is blocking where the power supply cables plug in, the cables will fit but you have to take the hard drive bay out with a screwdriver and then put it back when you are finished plugging it all in. Other than that, everything fits how it is supposed to in my build. BUILD - Ryzen 7 1700x EVGA BLACK RTX 2070 SUPER MSI B450 TOMAHAWK MAX II Corsair 750W PSU

Went from an old dusty coolermaster case to this, love this one, cable management was enjoyable and the light display works better than expected. Deffinetly worth the money.

Case was excellent to build in, For a mid-tower case it had a micro atx type of feel to it due to it being smaller than a standard ATX case.

Solid case.. overall quality is good. The lack of modern front panel features is disappointing

I really wanted to love this case because it's absolutely beautiful but if you're going with an ATX build I do not recommend it. My motherboard was extremely cramped in this, it had maybe a couple millimeters of space at the bottom portion of the case. Cable management and wiring in general is an absolute nightmare, again there's just not enough space. Don't plan on using any sort of HDD in your build because you'll most likely have to remove the hard drive cage to get all of your wires coming from your PSU to fit. Neither of my SSD's fit into the included mounts either so that was another flaw, they are standard SanDisk SSD's. This was the single worst experience with a case in all of the PC builds I have done over the years. I spent nearly 3 hours trying to get this thing to work but couldn't make it happen. The only reason im giving this two stars is because of how great it looks.