Customer Ratings & Reviews

Its a great cade to work with that has plenty of cable management space for your build. Best thing to do will be to replace the fans it comes with since they are 3 pin and will be a little noisy.

Absolutely the easiest pc cast to build in and it has plenty of air flow

Great looking case , super easy to work in the only down side i had with it is that if you want to out a 4080 or 90 in it , the fans will be almost right up against the side panel. Other than that the airflow is amazing

I wanted to redesign and upgrade my secondary PC which my daughter uses for gaming so I decided to build out an all AMD rig with a vertical mount so she could play Hogwarts at max settings at 1440p. After much research, I settled on the Hyte Y40. It has turned out to be a decent case but with a few problems. Material quality is definitely a step above average and the case itself is very sturdy. Building in it is pretty easy and straight forward and I love that the front, top and back just pop off and on. One thing I noticed is the exhaust fan was very loud. No matter what I did outside of slowing it down greatly, it was audibly louder than all the other fans. I ended up removing it and the lower intake fan and replacing the case fan with an aRGB 120mm and the intake with an aRGB 140mm. Another issue is one many case makers make and that is a lack of depth in the rear of the case for thicker cables to lay down easily and snap the back on especially if you have longer/thicker cables, hubs, accessories or more. It's crazy what even another inch would do overall. Lastly, and the biggest problem, was the riser card. This was installed with an Asus B650 Prime motherboard and no matter what I did the card would not sit fully in the PCIe slot because it didn't have enough depth before the screw down slat was flush with the rear screw bracket and bottom latch. I ended up having to detach it and readjust it and let it float a bit to fit in properly and now the screw down portion is about 1/4" above the screw hole instead of flush. Doing some searches shows I'm not alone in this problem with the riser implementation and most likely it is a seating issue with the PCI card->motherboard. Some have also had issues with the actual GPU mounting too. Now that everything is up and running, I DO like the looks and visuals of the case very much and it turned out exactly like I thought it would but the loud fan(s), poor QC on the PCIe riser and yet again lack of cable depth in the back for easier runs has me on the fence overall with this case.

Nice looking case with nice temps. Great cable management, well done HYTE!!!

The case is fantastic. Plenty of room. 2 chambered case makes hiding cables easy. Plus I bought the LCD screen from Hyte, as well. Absolutely love it.

Awesome case look so good. Good Airflow and great aesthetic.

Great case not as roomy as y60 but still plenty of room for an easy build pure white really pops.

This is by far my favorite pc case ever !!! Functionality and cosmetically ! The staff at Best Buy made sure I got the one I wanted and was amazingly polite and understanding 10 out of 10!!!

Loooks really nice , nice airflow and gpu mount make it looks cool

Beast of a case. great quality and unique style that will showcase your build. Expensive but if you factor in the riser cable it works out pretty even for iis size and quality.

It looks great and easy to install. And bottom fans are preinstalled. But thin metal and limited space for GPU cable come out

Excellent case. Best Buys dimensions are wrong but that didnt bother me, theres plenty of room. My favorite parts about the case are more so then the rgb fans but the deepness of the case and the Rising cable.

As the title says. Great case with lots of space that really shows off your build. Great build quality and really shows a lot of thought went into it's design. It is BIG for a mid tower case though so be aware of that!

I am very impressed with look and airflow of this case.My temps are in the mid 30's all across the zones.

Massive, awkward, heavy but stunning. I would like to see more filtering but can’t have everything I guess.

The Hyte y40 is a brand new compact mid tower case from the folks at hyte. The case offers a clean, minimalist design with tempered glass side panels that show cases your build similar to their y60 case. The case also includes a pcie Gen 4 riser cable which is a nice added on inclusion. I much prefer the look of the y60 but I also got the y40 purely because it fits my desk more in terms of space. Overall, the y40 is a sold choice for those who wants to showcase their builds.

Amazing case. Looks great, has great airflow even with PNY 4080 and all glass side panels on, Looks so cool, would definitely buy again. Super easy to build in as well!

Great case, plenty of space and great cable management! Vertical gpu mount is excellent and glass look is awesome!

I would recommend this case, good choice for who looking for a cool case