Customer Ratings & Reviews

I can't get my s pen out with this case, I don't have finger nails long enough.. And the top bridges too far for swipe down features.

2 pieces of tiny thin plastic not worth the price. We returned to in 10 minutes of purchase

Case claims 10' drop protection. Phone fell 30" from desk and shattered display. Do not recommend.

I woundnt buy this case, it slips off the phone and the 2 pieces come apart whenever they want. Not a well made cover.

Broke easily in about three falls sadly . It only last like about a month

Not protective at all. Phone was damage with one fall with case properly placed. No screen or side protection.

If you're looking the best screen protection (offset in the front) this is definitely your worst option.

The case would come off easily which made it not safe to thave phone on with this case

Did not fit the phone. Will be returning bavk to the store.

A two piece combo of rubber and hard plastic that fits right on, but much easier to come off compared to one piece cases. I’m not going to drop my phone to find out, but it looks like it should do pretty well in protecting the edges and back. It is slightly raised to protect a flat face impact but the sides are a little more exposed due to the phone's curved screen. I suspect that a drop will cause the hard shell to pop off on occasion as it barely holds onto the rubber, but, so long as it isn’t rolling down a flight of stairs it appears to easily protect from initial impact. The cut outs for the pen and USB port are a bit close, making it a little difficult to get the S-pen out without a bit of fingernail and the charging cord takes a little extra effort to push in. Since the bottom is hard plastic, it is not as flexible with the size of the cord as others though. The rubber is exposed on the sides giving a soft textured grip for holding and easy press on buttons. Overall, I feel that the second layer makes it feel too loose and may come off at the wrong time.

I thought I would give this a try. I've not used a two part case in well over a decade. This reminded me exactly why. I felt this case was very flimsy. The cutouts did match my phone as they should. The buttons were easy to push and that was nicer than my previous case. These had definitive clicks with each button push that was lacking before this one. When I attempted to remove it, it slid off so easy, too easy I believe. Just didn't feel like it would keep my very expensive device secure and protected. The sides didn't come as far up to the screen as again my previous case so it left a bit of a gap between the screen protector and case exposed to possible damage if it hits just right. This gap was all the way around the screen. The top and bottom of the front of the case did provide enough of a bumper to prevent the screen from resting on the table when face down. I didn't try any kind of drop test. I don't take those risks with my expensive devices, especially with a case I feel isn't sturdy enough to protect it.

Insignia's dual-layer protective phone case for Samsung Galaxy ultra 22 is new in the Insignia line. At first glance, I thought I had an excellent case, but after about three days of using it, I noticed that the slightest bump would cause it to come apart, not offering very much protection for your phone. When inside the hard plastic case, the inner rubber cover does not stay very secure. It's an okay entry-level case but, in my opinion, not the best for security for my device. I believe with a better grip with the outer shell, and this one would have been a 10!!!! Although I did have excellent button control and functionality. I have been able to charge it with my wireless charger but not very well. And with slots at the bottom, it was easy to plug up and recharge as well as his speakers and get access to my s pen, so that design was on point. I admit it looks fantastic on the phone. But Be careful. But with no screen protection, it's a no-go. And there is, in my opinion, no absolute shock protection. And with no water protection, I will have to pass. Pros: Price Looks Cons: Construction Flimsy No protection from Damage No support for inner case

This is a 2 part cover. It has both a thin silicone cover which you put on first and then you slide a harder plastic cover over top of that. Simply needs stated, this cover provides no protection whatsoever for the front screen. While it does feel good in your hands, you do not get the feeling it will otherwise slip out of your grasp. The part where this case is lacking and the reason for only two stars is the fact it does not provide enough wrap around coverage for the sides. The top part of the side buttons while slightly, but they are still exposed. It needs to fully encompass the sides of the case. The fact it does not, leaves the sides of any screen protection you may add vulnerable to early peeling up. The installation takes only seconds but please make sure you seperate the two first and install one at a time. Otherwise you will force it and you do not want to risk any damage to the phone especially at what these devices cost nowadays. Some minor fixes as indicated above would make this much better and it would receive better ratings.

The inside layer is so mushy and flexible that it's a pain to get on. When it is on, there is so little edge coverage that I can still see my volume and power keys (which are hardly protected/fitted with a little rubbery flap) when I'm looking straight at my device, AND I can see the metal frame of my phone from the sides. Screen protector edges are left incredibly vulnerable. Fine to get you by until something better comes along or for someone looking for an EXTRA slim profile, but I can't imagine this providing much protection aside from keeping the back from getting scratched. PS. It's also a fingerprint magnet, despite the black matte finish.

This phone case is terrible I do not recommend buying this case. Although it is affordable it does not sever its purpose of protecting your phone, your phone is easily able to slip out. I would personally recommend saving your money and buying a better case.

Got this case to have when my S22 Ultra came in. I've used it for 10 minutes and it's garbage. The top lip makes it difficult to swipe down the notification panel, the case sides are to soft and slick to maintain a grip, it's next to impossible to get the SPen out, and the buttons on the right side slip out of the case. someone should be fired for designing this. Already ordered a new case and will return this one.

Good case, gets the job done seems to be well made