Customer Ratings & Reviews

I bought this charger to use with my pixel 8 pro inserted in a Torras magsafe case. I Will be returning this item to the store because I find it's just a little too small for my fingers (the phone has slipped out of my hands a couple of times using this grip) and it is not compatible with my favorite charger, the wireless Pixel high-speed easel charger. While using the Toreas case my phone charges just fine on the Pixel charger as well as most other magsafe compatible chargers. But after installing the oh snap mount on the back of the Torras my phone will no longer charge on the dedicated Pixel easel charger. The Oh Snap mounts to the case with adhesive, I now have to completely remove the case from the phone in order to charge wirelessly on the Pixel charger. This Is a showstopper for me. However, I can charge the phone with this mount attached on most other regular (i.e., slow) magsafe chargers, Therefore, if you don't use the Pixel easel charger, you may like this mount just fine.

Great product..Very thin and supports magSafe charging..

The grip is not very comfortable to hold and scratches fingers. The build looks good but after a few days of use the grip rotation doesn’t rotate smoothly.

2nd product works well the first one I brought was a 4 but ut was upgrade to a 5 and this one works better it's a maganet

Good product a little hard to remove from phone base.

Excellent phone grip and the magnet is so strong i can mount my phone on any metal surface

Available when you need it, and disappears into the back of your phone when you don’t.

Nice accent to phone case that provides function when you want it but stays out of the way when you dont. No need for use of adhesive if using magsafe case. Hsppy.

Recently upgraded to an iPhone 16. Got a very sleek Kevlar case for it and didn't want to bulk it up with a Pop Socket. Saw these advertised on IG quite a bit, so decided to bite the bullet price wise...Kinda steep. No regrets! Ultra slim, really nice materials. Looks good, works good, feels good!!

Love this, was a bit confused at first then watched a video of how to use the kickstand and fell in love. It’s great that they have a kit to allow use if your case does not work or have the magnet. It’s super strong, my wallet no longer falls off and I can stick it to the fridge or other metal services

I’ve been using this phone grip for over a week, and I’m truly impressed by the level of thoughtful engineering that went into it. I am giving it my highest personal design award for a simple item that has a positive daily impact on my life ;)

I love my ohsnap 4 luxe that I had to buy more. Just so I can place them on my favorite cases without having to keep taking them off and placing it on my current case. And seeing the Black Friday deals on these, you know I had to buy them as stocking stuffers.

Better than a popsocket Magnets are very strong especially when using a magsafe car mount I was actually thinking about getting another one in a different color

Not complaining about Best buy, this is about the product. I saw an ad on Facebook for this product. It looked really interesting. Slaps onto your phone with magnets, can hold your phone multiple ways, it's sleek, and can be used with wireless chargers. Being skeptical about ordering through Facebook directly, I started researching and was pleasantly surprised to find that a reputable business like Best Buy carried the product. So, I ordered the product through Best Buy and received it very quickly. Once received, I looked it over as I removed it from the packaging. I was disappointed to find that it had to be attached to my phone with adhesive, not just magnetically "snapped" on as shown in the advertisement. Red flag #1 - I'm not sure how one would switch it between devices as advertised when it has to be adhered directly to one device. Reluctantly, I did attach it to my phone, because it is what the instructions said to do. After attaching, the instructions say you can use the product after two hours. I waited a full 24 hours before using, to make sure it adhered well. In that 24-hour timeframe, I did need to charge my phone and found it very difficult to get the wireless charging to work. It was like my phone was too far away from the wireless charger. After much placement adjustment of my phone to the charger, it did finally start charging. Red flag #2. From the advertisement, I was interested in the "one finger" configuration of holding my phone and the phone spinning trick. So, after the 24 hours, I tried the 'one finger" holding feature first. Opening the holder as shown in the instructions on the packaging, I was disappointed there was no "snapping" action happening, the cover only flopped open. Red flag #3. I was also disappointed to see cheap plastic construction of the "cover" and supporting "struts" involved. Red flag #4. But this is to be new age materials and construction, so I trusted the process, but have since found out I shouldn't have. As the instructions show, I slipped my finger through the support "struts" to find it very tight before I could even get to my first knuckle. There was no way the phone would remain securely gripped with just my fingertip tucked between the "struts". Red flag #5. I removed my finger and tried to close the cover, only to find that the cover no longer lays flat within the metal ring as it should. It's like the "struts" are all stretched out and deformed now. No more red glags, now I have a real problem. I am a male, just like the presenter in the advertisement I watched, but I do not have big hands or fat fingers by any means. So, I am very disappointed that the product couldn't perform as shown and it is ruined in my first attempt at using it. I've spent the last few days, looking to see if it's possible to get the "struts" in place again and reseat the cover so it lays flat again. I cannot. Placing the phone back in my pocket, the cover stays open and produces a bulge in my pocket. Also, there is no "snapping" action that takes place when opening or closing the cover. And as for the adhesion to my phone, I was able to pry the whole unit off my phone with just my fingers and very little pressure. So, it didn't even adhere to my phone that well, even after a full 24 hours before using the unit, plus the few days of messing with trying to reseat the cover flat again. My question would be, how long would it have even stayed on my phone, as it slips in and out of my pocket all day long. Also, now that I have the product removed from my phone, I've continued to try to "fix" the "struts' . When pressing the cover down, the plastic part popped out of the metal ring (the only "snap" I've experienced so far). I have been able to "pop" it back into place, but the spinning action is more 'labored' now. I don't know if I just got a defective one, or if I actually "broke" it so easily with my little hands. But I'm very disappointed in the product I received. Neat idea, nice design, looks sharp... but not the quality I was hoping for. - 1 star and getting returned.

To keep it simple just watch the OhSnap video on youtube. You will not be disappointed! This is my favorite MagSafe accessory! It is sleek, thin, strong, and very well made. Easy to use and I’m excited to switch it over to the 17. The kickstand is very solid as well. I purchased the navy blue and it matches my 15 pro max perfectly.

After trying different brands and styles, this is my favorite. I have purchased several for different cases.

I love it. However broke within a year. Luckily I signed up for warranty

Good product but doesnt meet my needs. I dont like the sticky seal on it, it makes it difficult to take off when you want to use another magnetic grip or stand.

Yes, this is a strong magnet. Works great. I thought the stand was really flimsy but it's pretty strong. I was surprised.

I have tried several brands of phone grips and this is the best. Very thin. For my needs it is perfect.