Customer Ratings & Reviews

Decided to try out this phone grip after having seen the ads online. Honestly, I don't particularly think this is any better than a popsocket other than it being super thin. I do wish it was fully magnetic rather than needing the additional adhesive to stick it to your phone, but it's at least reusable. I don't find it as comfortable or natural to hold as a popsocket due to the material being more plastic-y with sharper edges. I also find it difficult and uncomfortable to put your finger through the grip rather than just holding it normally, so I'd say this grip is not as accommodating for people with chubbier fingers or sensory issues. I think this grip is cool but not $40 cool. If you're thinking about getting this, either wait for a sale or buy open box to save some money.

A bit on the expensive side, but I was able to get it on sale. I ues it on my magsafe cellphone case on my s24 ultra. It enhances the magsafe strength for other mounting devices. Also is still able to charge wirelessly. Can heat up with some wireless charges if they do not use an integrated cooling system. Thin profile, doesn't snag on my pocket at all, works great as a kick stand as well. Using the grip is also quite comfortable and doesn't strain my hand with prolonged use.

Pros: • ​Adds MagSafe capability to my Samsung phone and non-MagSafe cases. • ​Incredibly thin and sleek profile. • ​No adhesive needed; stays on the phone well. ​Cons: • ​External magnets are too weak for car mounts. • ​Stand is too short to hold the phone upright. I’ve been using OhSnap for over a year now, but the Snap 5 is a bit of a letdown compared to previous versions. While I love how thin it is and the fact that it doesn't use adhesive, the external magnets are noticeably weaker. ​On previous versions, the magnets were super strong and 0 issues with it falling off any magsafe mount. With this one, my phone falls off my car mount every time I hit a bump. It stays on the phone just fine, but the external grip is too weak for the road. I also don’t use the stand feature; it’s too short to hold the phone upright, so I only use it like a PopSocket to grip the phone. ​ On the plus side, I haven't had any issues with parts breaking like some other reviews mentioned. It’s well-made, just not as strong. If you want a slim grip to add MagSafe to an Android phone, it works, but don’t expect it to stay put on a bumpy drive. I ended up returning this and going back to the previous version.

Thinnest and best grip with the strongest magnets. Snap it to your car while you're working on, it to the fridge in the morning, there's a snap mount charger for your car. I love this whole thing

I purchased one of these for my Samsung Galaxy S24 Ultra. I really just needed to magnetic ring for Magsafe charging in my car. I didn't even look at the price not really thinking they would be more than a few bucks. When it rang up at $40 I was a bit surprised. I was not too worried about the $40 so I bought it. If it did what it claimed a $40 price point seems OK but a bit high. After securing it to my phone case and waiting 24 hours I tested it. I stuck it to the magsafe and it the 2 magnets really held together great. I pulled the phone off the magsafe and the ring stayed. I email support for help. They did sort of respond. By then I had gone to work and, on my way, home I pulled the phone out of my pocket and no ring. I searched anyplace I recall taking my phone out, but I could not find it, it is magnet, so I guess it was just stuck to something. On my way home I swung by BestBuy to find an alternative. The Manager refunded me without a problem as I am a very frequent and loyal customer. He recommended I buy another of the same and give it a shot with the included sticker that may help. I am now at the point of waiting 24 more hours. I thought the customer service was fair to poor at OhSnap. I feel the product is well designed but poorly executed. When you contact the company they give dropdown menu choices of the issue, and they are primarily "the tape doesn't stick" or some variant of that. It seems too be the biggest issue so why not just get better tape? 3M makes some killer tape that would work great. I think this might have a 3M tape but not one of the better ones. -Product Design and build 4 -Product adhesive 1 -Product function (assuming tape works this time) 5 -Customer support system 2 -Customer Support Reps 3 -Price point 3

Finally, a phone grip that doesn't add bulk! The OhSnap Snap is incredibly thin, making it easy to slide my phone into my pocket without snagging. The magnetic strength is impressive—it snaps securely to my MagSafe charger and car mount every time. I love that it doubles as a stand and still allows for easy MagSafe charging through the grip. It’s the perfect minimalist solution for anyone who wants a secure hold without the thickness of a traditional pop-socket.

Works and I am happy I can use the stand and still be able to charge my i-phone 17 pro max with an Otter Box (using the snap magnetic ultra thin universal phone grip and stand with MagSafe Charge). A little fussy to get the placement for the stand...compared to the last vey sturdy stand I used on my old phone.....but, had to plug in the last i-phone to charge it...ugh! All in all, I like this option better.

Magnet holds well. It does work wirelessly which is an advantage over PopSocket, but does feels more flimsy.

*If* mounted low on the case (I use my pinky for support when holding the phone), I found this to be compatible with my Pixel 8 Pro, in a case, with the Pixel Stand 2nd Gen, and, if I stick the metal plate included with the iOttie iTap 2 Car Mount, (to the mount, not the phone), compatible with the car mount as well. Bought this a little nervous it wouldn't work with my current Android setup, but seems fine. Can't seem to get the wireless charging of the Pixel Stand 2nd Gen to passthrough, if I put the grip higher up on the Pixel 8 Pro where the coil is located. The magnet seems to need more surface area than iOttie Tap 2 magnet provides, hence sticking the metal plate to the iOttie. The kickstand feature doesn't seem to work though, perhaps the phone is too big.

This phone grip does it all! Phone grip, mag base mount, kick-stand, and fidget toy all in one. At first I was concerned that it wouldn't be durable enough, but after months of use it is holding up great and works good as new. One of my favorite things is how slim the profile is so you don't even notice it when the grip is pushed in. The mag charger mount is super strong. It will even hold your phone on the side of a metal cabinet! Not a cheap phone grip, but well worth the price.

I was tired of my popsocket getting snagged on my pants pocket. I started looking for a slimmer option. Stumbled onto the snap4. It's not as easily manipulated or deployed with a single hand like the popsocket but well makes up for it with how slim it is! Plus it's mag safe compatible (magnetic). I don't even have wireless charging on my device and I think it's totally worth it. If you have wireless charging, this is even more worth it.

Long time pop socket user vs this oh snap. I have to say from a profile and mount perspective this is awesome. The purple color made my wife happy. However. The con of this mount is that it feels flimsy when using it. It doesn’t always flatten out like you would expect it. And when trying to use it as a leaning stand it does not work as expected. We have used pop sockets for years prefer the fixed models. So in short if flat profile is what you want this is a good choice. If durability and function is what you want consider other models.

I like the product — slim profile, strong magnet, and the adhesive has held so far, but it’s only been 4 months. However, the folding mechanism, which is made of pretty thin plastic, had not held up. The plastic is now bending in ways that make it almost impossible to collapse entirely, and if i put it in my pocket not completely collapsed, it gets caught up when trying to take it out of my pocket. For the price, i was hoping it would last more than 4 months.

A must have, total game changer. I love that I don’t have to remove the grip to put it on my charger or dash mount. Very thin and stylish. Love putting it on my refrigerator with the magnet while cooking and following recipes.

[Employee of bestbuy] The best phone grip in my opinion, only things i dont like is that the new magsafe ones where you can take it off you phone doesnt hold my iPhone 15 pro on some metal surfaces without slowly sliding down(fridge door) but does hold it on say solid metal without sliding. Also it does creak a bit when adjusting your grip from the plastic parts of the grip rubbing against eachother but still the best grip if you need one just does add a bit of weight to the phone as well

It is pretty expensive compared to similar products. But it is the thinnest I've seen so it sits pretty flush on the phone and does not give you a hard time when putting in pocket or getting it out. It also allows for charge through so you dont need to remove it to use magsafe charging. But it does not accommodate thicker fingers like mine very well.

Really like how thin it is and my main reason for purchase was the Qi pass through. Descriptions stated that it was magnetic and would stick to various surfaces, but was pleasantly surprised when it stuck the the rack in the weight room. the pop out portion does seem a little frail, but have not had issues so far.

Good grip, and a decent stand. Its nice and slim, looks good, but does get hot when wireless charging. I would get it on sale though. Its also able to hold up my fold7 when open.

I came across this product through my friend and then decided to purchase one for myself. I absolutely love using my phone without a case. This ohsnap provides me with an additional layer of protection and comfort.

Installation was quite easy. I was a bit worried initially, because I was confused on how to use it. And while I was trying to figure that out, the center part fell out of the outer part. I was able to see that this part sits in some grooves in the center, and if I stuck it on my phone, the center piece falling out in use shouldn't be a problem. But right out the gates, I was already contemplating bringing the thing back for a refund or exchange. On my magsafe case, it was super easy to install. It just popped on, and I pressed it in. I was a bit worried about using a magsafe charger with this, since several people had complained about the glue coming off or melting, making the grip fall off their phone. I actually don't like using magsafe overnight because I love to doom scroll my phone at night (lol). I typically just use the cable. But in the car, I have a magsafe charger, and I was a bit worried since I do feel the grip getting hot. So far though, no issues with it melting off after a week of use. I will say, I could see if you use a magsafe charger overnight, how the adhesive would melt for those who charge like this daily. The other concern was that due to how light and thin the product is, it feels quite flimsy. So initially I was worried it would break easily. After a week of use and getting used to it, it does seem pretty sturdy despite my initial reaction. We shall see how long this grip lasts! So far so good. But the initial impression definitely threw me off a bit.