
This wall-mountable range hood features a 400 cfm exhaust and an aluminum mesh filter that remove smoke and cooking odors from the air so your kitchen is free of lingering odors.
Q: can this model hang over an island cooktop or is it just a wall mount unit
A: Model GXW6536DXS can only be wall mounted. If you need a similar model that can be installed in an island situation then look into model GXI6536DX.
Q: I need to order the optional conversion kit
A: Dear Valued Consumer: Recirculation Kit Part Number W10294733 for non-vented (recirculating) installations for model GXW6530DX or GXW6536DX only. You may purchase this through your dealer or call our parts department to order at 1-800-442-9991. Thank you for your interest in our Whirlpool vent hood.
Q: I have a 9 foot ceiling, will this work?
A: For vented installation, you can adjust the chimneys for ceilings between 7ft 4 inches and 9 ft 5 inches with vented slots not showing. For vent slots showing, the ceiling can be between 7 ft 4 inches and 9 ft 9 inches.
Q: What is the depth from center forward to room, Island mount. I have 9"
A: Hello. You can see the dimension guide for this range hood on our website at http://bit.ly/1THeM9S . We hope this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool appliances!
A: Dear Valued Customer: Thank you for your inquiry regarding Whirlpool vent model GXW6536DSX. The sones for this model is 7.20. Thank you again for your inquiry. We appreciate and value your business!
Q: What is the length of this item
A: The product dimensions of our 36 inch range hood model GXW6536DXS are listed below: 36 wide 20 deep Height can extend from 27 1/8 minimum to 45 ½ maximum if non-vented and 27 1/8 to 41 1/8 for vented. For vented installations, the chimneys can be adjusted for ceilings between 7ft 4 inches and 9 ft 5 inches with vent slots not showing and between 7 ft 4 inches and 9 ft 9 inches with the vent slots showing.