Kenwood - 6.5" 2-Way Marine Speakers with Polypropylene Cones (Pair) - White
Kenwood - 6.5" 2-Way Marine Speakers with Polypropylene Cones (Pair) - White
Specifications
- RMS Power50 wattsPeak Power Handling150 wattsMinimum Frequency Response60 hertzMaximum Frequency Response20 kilohertzSensitivity86 decibelsSpeaker Size6-1/2"
- Key Specs
- RMS Power: 50 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 150 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Minimum Frequency Response: 60 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 86 decibels
- Speaker Size: 6-1/2"
- Speaker Type: Coaxial
- Tweeter Composition: Balanced dome (PEI)
- Woofer Composition: Polypropylene cone
- Woofer Surround Material: Santoprene
- General
- Brand: Kenwood
- Model Number: KFC-1653MRW
- Product Name: 6.5" 2-Way Marine Speakers with Polypropylene Cones (Pair)
- Color: White
- Number Of Speakers: 2
- Series: Marine (Part of a group of the same product type with similar features.)
- Audio
- RMS Power: 50 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 150 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Minimum Frequency Response: 60 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Sensitivity: 86 decibels
- Features
- Integrated Crossover: true
- Marine: true
- Grille Included: true
- Design
- Speaker Size: 6-1/2"
- Speaker Type: Coaxial
- Tweeter Composition: Balanced dome (PEI)
- Woofer Composition: Polypropylene cone
- Woofer Surround Material: Santoprene
- Dimensions
- Cutout Diameter: 2.44 inches
- Mount Depth: 2.44 inches
- Flush Mount: false
- Product Height: 4.4 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 7.8 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 15.8 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 4.6 pounds (The out of box weight of the item.)
- Warranty
- Warranty - Parts: 1 year
- Warranty - Labor: 1 year
- Other
- UPC: 019048210340
Listen to music in style on your boat with these Kenwood KFC-1653MRW marine speakers, which feature 50W RMS power handling to deliver quality audio with 4 ohms impedance. The grilles are included for simple installation and a sleek look.
- Handles 50W RMS power @ 4 ohms: For powerful sound.
- 60Hz minimum frequency response: Offers accurate sound reproduction.
- Balanced dome (PEI) tweeter: Delivers clean, crisp audio.
- 6.5" polypropylene cone: Protected by a Santoprene surround provides a rich soundscape.
- 2.44" mounting depth: For the right fit.
- 4 ohms impedance: Conducts power evenly to keep the speaker at an appropriate level.
Whats Included
- 6.5" 2-Way Marine Speakers (Pair)
- Mounting screws
- Owner's manual
A: They should fit just fine. I just installed four of these on my boat in August. If I recall, the instructions say the hole needs to be 5.5" but my holes were only 5". I bought these speakers as I liked the price and it had good reviews. I was ready to cut the holes to fit, but these speakers fit the 5" holes with no modification. They are snug, but they fit.
A: two way means it has a woofer and a tweeter. Three way would add a Mid range speaker.
Q: Will water ruin the speakers
A: They can get splashed and mine have been fine. Idk about submerged.
A: Please contact Kenwood Customer Service for more information.
A: Yes
A: Yes
Q: What is the depth for these! I am replacing my rv speakers Sony xs mp1611w
A: The mounting depth for the KFC-1653MRW is 2-7/16".
Compare similar products
Listen to music in style on your boat with these Kenwood KFC-1653MRW marine speakers, which feature 50W RMS power handling to deliver quality audio with 4 ohms impedance. The grilles are included for simple installation and a sleek look.
Make a splash with this 6.5-inch KICKER coaxial marine speaker. Its weather-resistant design protects it from a wide range of maritime conditions, and the LED lighting system offers seven vibrant colors that add ambience to your grilles. This KICKER coaxial marine speaker has a 4-ohm voice coil to maximize amplification options. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
Take your music for a water adventure with this 8-inch KICKER marine coaxial speaker. UV-treated components are built to withstand most weather conditions, and the hardware is forged from rustproof 316L stainless steel for optimal durability. This KICKER marine coaxial speaker comes with a marine-grade grill to give it some protection from the elements. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
Blast powerful tunes on your boat with this 6.5-inch KICKER coaxial marine speaker. The charcoal and white grilles lend a versatile look to match the interior of your hull, and the 4-ohm voice coil provides flexible amplification options. This KICKER coaxial marine speaker includes stainless steel mounting hardware for durable installation. Geek Squad Installation Recommended Visit your local Best Buy store for more information.
| Pros for Kenwood - 6.5" 2-Way Marine Speakers with Polypropylene Cones (Pair) - White | |||
|---|---|---|---|
| Sound Quality, Installation Ease, Water Resistance | Sound Quality, Ease of Installation | Sound Quality, Ease of Installation | Sound Quality |
| Cons for Kenwood - 6.5" 2-Way Marine Speakers with Polypropylene Cones (Pair) - White | |||
| Mounting System | There were no cons for this product— | There were no cons for this product— | There were no cons for this product— |
Specs
Reviews
Customers are saying
Customers are enthusiastic about the strong sound quality and good bass produced by the 6.5" 2-Way Marine Speakers. Many also appreciate the ease of installing these speakers and their water-resistant design. However, a few customers have noted challenges with the mounting system, as the hole pattern may not always match OEM speakers.
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
- Rated 5 out of 5 stars
Great quality and good looking!
Speakers are of great quality and were easy to install. I put them in a custom mdf cutout in my golf cart. Sound is great and haven’t been concerned yet about water hurting them. Have them powered by the Kicker gauge style marine stereo and the sound gets loud, even over the gas engine!
Neverlayup Posted
- Rated 5 out of 5 stars
Great speakers for the price!
Great speakers for the price I purchased these to put on the outside of my RV replacing some older ones and they sound much better Sound quality is good and clear They even seem to have a little bit more bass than my previous speakers Obviously if you want to a lot of bass then you need to hook up some subs and power to push it but that’s not what I was looking for on the outside of my RV They look nice installation was easy to attach to an existing hole And they look pretty sharp
Dfelter Posted
- Rated 5 out of 5 stars
Good sounding speakers
Replaced a set of 15 year old marine speakers so the bar was not high, but there was a significant improvement in the lows and highs. The speakers fit perfectly in the existing holes. The cover doesn’t come off the speaker if it matters to your installation. I didn’t end up using the template Or the Clips as they didn’t fit on the fiberglass (too thick) but drilled one hole at the top, mounted the speaker and then drilled through the cover with a smaller than recommend drill bit and threaded the other screws directly in the fiberglass. With six screws it should hold fine (four in the fiberglass before). The other speaker went into a plastic insert. Mounted the same way and it worked fine too.
TechNH Posted