Questions & Answers

Q: QuestionI'm wanting to replace a GE Profile Microwave model JE1860SB 001. Is there a new model in this size?

Asked 6 years ago by Jerry.

This question was asked about the related product: GE - 27" Built-In Microwave Trim Kit - Black

• A:Answer Hi Jerry - It's great to hear from you! We certainly appreciate your loyalty and suggest GE Profile™ 2.2 Cu. Ft. Countertop Sensor Microwave Oven PES7227SLSS or GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227ANDD. This "built-in ready" model is compatible with GE® Required 27" Built-In Trim Kit JX7227SLSS and GE® Required 30" Built-In Trim Kit JX7230SLSS (sold separately). We suggest viewing the Quick Specs document at the following link for cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - We’re glad to have you in the family. Keep in touch at GEAppliances.com. Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have microwave PES7227SLSS- I was sold the Trim Kit Jx7227SLSS and the door hits the trim kit and wont open and close properly. Now I have custom cabinets that fit the trim kit JX7227SLSS, and I have to replace the microwave. Will the PEB7227DLBB fit

Asked 6 years ago by LL.

• A:Answer I don't know if that model will fit or not but I can tell you I had the same problem and, after trying several replacements of the same trim kit and microwave, I had to switch to a Kitchenaid microwave and trim kit instead. I have customer cut cabinets too and this one fit the same opening as the GE: Kitchenaid Model:KMCS3022GSS

  Answered 6 years ago by JeannetteVerified Purchase

  Helpful (1)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionMy cabinet dimensions are 25 1/2 width, 19 7/8”, 20 1/4. Will a model peb7227slss fit and will trim kit jx7227slss fit the peb7227slss? thanks in advance.

Asked 6 years ago by PR.

• A:Answer Hi this is the correct trim kit for the microwave model you mention. If you look in the Manual and Guides Section of the kit listing these is a data sheet that if you click on it, you will find illustrations with clear measurements of opening for the microwave that will fit with this kit. The measurements of the microwave you mention are also listed deep in the listing also.

  Answered 6 years ago by Murry853Verified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI just purchased GE Profile 2.2 Cu Ft Built in Microwave and need to buy the trim kit. The trim kit is: Model:JX9152DJWWSKU:5527542 What is the height of the trim kit? Obviously the Length is 26.9, any other specs?

Asked 6 years ago by Sanderling.

This question was asked about the related product: GE - Deluxe 26.9" Trim Kit - White on White

• A:Answer Hello Sanderling - Thank you for the excellent question. We are happy to help. The height of the trim kit is 18-7/8". For all of the dimensions and specifications, the details can be found here: https://files.bbystatic.com/6Y3CcukvUw3Q%2BvRvdclByw%3D%3D/B35FFC85-7356-48BA-B7AE-909280249F28.pdf Please let us know if you have any more questions. - John

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI brought a GE JES2051DNBB. I need a trim kit because I'm replacing my old microwave. I cannot find a trim kit. Could you help with finding one that compatible?

Asked 6 years ago by christopher.

This question was asked about the related product: GE - 27" Built-In Microwave Trim Kit - Black

Q: QuestionI just purchased GE built-in microwave model PEB7227DLBB. Can I use Trim KIt model #JX7227SLSS with it?

Asked 6 years ago by Coco.

• A:Answer I don't think the answer here is correct. At least according to the GE website, the SS version of this trim kit (as opposed to the BB version) will work with the PEB7227DLBB; it is just a color difference for those wanting a SS trim.

  Answered 4 years ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI have a GE Microwave PEB7226DF1BB (black) and matching trim kit. I'd like to substitute the black frame for stainless steel. Apparently, JX7227SLS would fit but it is not available. Is there a frame/kit that would fit that is currently available?

Asked 6 years ago by Cuqui.

• A:Answer Hello Cuqui. Microwave trim kits are model specific. There is not a compatible stainless steel trim kit available for the microwave model PEB7226DF1BB (black). Thanks for checking. Olga

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThis trim kit does not fit the PEM31SFSS - the dimensions are wrong on the Spec sheet provided to others - this kit seems to fit the 2.2 size microwave - question is what Trim kit actually fits the GE profile 1.1 PEM31SFSS could it be part#JX827SFSS?

Asked 6 years ago by Frustrated.

• A:Answer This 27" trim kit fit perfectly around my 2.2 microwave so maybe you need the 30" kit. I wouldn't know what to recommend to you but I would suggest you take all your measurements of your opening & microwave to Best Buy for them to figure out for you. That's what I did as it was very confusing.

  Answered 6 years ago by MrsChychVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the closest trim kit color to match with the color of the GE microwave PEB7227 in the color of the "Gray" model?

Asked 7 years ago by stephbonwils.

This question was asked about the related product: GE - 27" Trim Kit for Profile Microwaves - Black Slate

• A:Answer I believe GE makes a Gray surround or you could go with Slate (PEB7227ELES), Black Stainless BLTS, Black Slate FMDS, Stainless SLSS, White DLWW. I urge you to go to the website shown. "Build in microwaves and "Related Products and Accesories" tab that shows all the choices. VERY IMPORTANT!! NOTE: you will have a choice of 27" or 30" surround. It is probably most dependent if you have room for the larger one around the microwave cut out. I had to use the 27" otherwise it would have hung out over the side from the cabinets. It fit PERFECTLY and looks great - - I used the Stainless Steel with the gray. https://products.geappliances.com/appliance/gea-category/microwave-ovens

  Answered 7 years ago by JamesasrVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHello, I am replacing a microwave and currently have trim kit JX7230SF1SS. Is this compatible with the PEB7227SLSS. Thanks.

Asked 7 years ago by LW.

• A:Answer The description literally says it’s compatible with the 2.2 profile microwave. Am I missing something here? Need to buy a 27 inch trim kit myself and if 2.2 is required, I will be upset since it won’t fit.

  Answered 4 years ago by Chuck

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWhat is the cut out size for this trim kit webuilding custom cabinets

Asked 7 years ago by Anonymous.

• A:Answer Hi - We encourage you to view the Installation Instructions at the following link for complete cabinet cutout dimensions, clearance requirements, etc.: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40782.PDF - Thanks for choosing GE! Sue

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi, my JE1540GW 002 built in microwave. For PEB7227SL/BL The cut out is 24 1/4 X 17 3/4 X 25 in deep. I can widen cut out to 25 1/2" by trimming the molding. However, the cabinet overlap at the top would be zero. Can I shim up the base 1/4"? Help?

Asked 7 years ago by Lou.

• A:Answer Hi Lou- We certainly appreciate your loyalty. We re unable to offer modifications to the UL approved installation provide in the Installation Guide at this link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40782.PDF - Any product failure due to improper installation is not covered under the Warranty. Thanks for checking with us! SUE@GEA

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCAN I USE THE SAME TRIM FROM MY OLD MODEL TRIM# JX2127H FOR MICROWAVE MODEL# PEB7227SLSS

Asked 7 years ago by SAMBO.

• A:Answer The trim I uses on that microwave is JK7227SLSS

  Answered 7 years ago by billVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI believe I need a trim kit JX7227DLWW for a GE PEB7227DFWW cabinet type microwave. What is the cut out size requirement, I have 24.5 wide by 16.375 high. this foe above an oven that is 27 inches wide

Asked 7 years ago by Trev.

This question was asked about the related product: GE - Deluxe 26.9" Trim Kit - White on White

• A:Answer Hello Trev - this is Nancy at GE Appliances and we are happy to help you. Yes, the 27" trim kit for the PEB7227DLWW microwave would be the JX7227DLWW trim kit. It requires a cabinet cutout of 25-1/2" wide x 16-3/4" high. We hope this helps! Thanks for checking with us!

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes the kit come with all the brackets for the cabinet to install the microwave

Asked 7 years ago by Tbone.

• A:Answer Yes. It comes with all the necessary attachments. However the design is poor, as it does not have an easy way to adjust the width or height, therefore forcing you to mess up the wall to make the hole bigger or cut the metal plate slightly to make it fit.

  Answered 7 years ago by RomerVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the actual size of the trim border?

Asked 7 years ago by roxy.

This question was asked about the related product: GE - 27" Built-In Microwave Trim Kit - Black

• A:Answer For this trim kit, the opening size is 24.13" W x 12.83" H.

  Answered 7 years ago by CommunityAnswer

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the weight of this trim?

Asked 8 years ago by Mike.

This question was asked about the related product: GE - 27" Built-In Microwave Trim Kit - Black

• A:Answer Hi Mike- Net Weight is 12.0 lbs. Keep in touch! SUE@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan trim set JX2027DM or JX230DM be used for Microwave model PEB7227SLSS?

Asked 8 years ago by Charles.

• A:Answer Hi Charles- GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227SLSS is compatible with GE® Optional 27" Built-In Trim Kit JX7227SLSS and GE® Optional 30" Built-In Trim Kit JX7230SLSS. We suggest to view the Quick Specs for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - Microwave trim kits are not interchangeable. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. Thanks for choosing GE! SUE@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI was wondering if this trim kit is compatible with the PEM31EFES model microwave?

Asked 8 years ago by Joejoe.

• A:Answer Hi Joejoe- Thanks for choosing our GE Profile PEM31EFES! No, this model is compatible with GE® Optional 27" Built-In Trim Kit JX827EFES and Optional 30" Built-In Trim Kit JX830EFES. We suggest to view the Quick Specs for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEM31SF_EF_BM_FM_R2_17.pdf - Enjoy! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question