A:AnswerYes. It would take a USBC to lightning cable to charge an iPad with this wireless Anker phone/watch/AirPod charger (with the extra port in the back of the wireless charger).
A:AnswerI would charge the iPhone 11 on the wireless charging area. If you would like to charge an additional iPhone or iPad, you would need a USBC to lightning cable to use the extra port in the back of the charger.
A:AnswerAn Otterbox phone protector is thick by design. My phone has a thinner case and charges with no problem as long as the thin metal mag plate for my car mount stays low on the back. Otterbox may interfere with the Qi charging signal depending on which Otterbox model you own. My wife’s phone has a thicker (non-Otterbox) case and must be placed precisely on the charger for the Qi charge to work. I’ve read mixed results from Otterbox case owners. The convenience of wireless charging might mean going to a thinner case depending on your needs.
A:AnswerThe USB-C port supports fast charging, it can be up to 18W output. If you have any further questions, please feel free to contact us via support@anker.com or call us at +1 (800) 988 7973.
A:AnswerThanks for your question. It is a 4.0*1.7mm DC cable. It can't be separated from the adapter. If you have any further questions, please feel free to contact us via support@anker.com or call us at +1 (800) 988 7973.
A:AnswerNo, it can't charge the beats pro. If you have any further questions, please feel free to contact us via support@anker.com or call us at +1 (800) 988 7973.
A:AnswerSolid blue: Charging or fully charged
Flashing blue: Foreign object detected
Flashing green: Incompatible input voltage
Exception semantics:
Detected abnormal voltage status (input over/under voltage/heating of mobile phone, continuous low-power charging, stop working, alarm for 10 minutes and then restart; receive over-temperature alarm, stop working, and restart after 20 minutes of alarm) and other abnormalities: Flashing green, 1Hz
The first FOD is detected: the blue light flashes, 4Hz (only put the metal piece and not put the phone)
The second FOD is detected: the blue light flashes, 1Hz (the metal piece is attached to the back of the phone while being put)
If you have any further questions, please feel free to contact us via support@anker.com or call us at +1 (800) 988 7973.
