A:AnswerI have the turntable connected to the phono inputs on my AV amp. You'll need some sort of amplifier in line to get sound out of the record player, it's output is the typical RCA stereo/2 channel red-white plugs.
A:AnswerI connected mine to my Samsung soundbar via an aux cord with ease and the sound quality is great. I would recommend trying that for starters if you have a system that is compatible.
A:AnswerYes, the turntable has a cable that has RCA plugs at the end, and a switch on the turntable allows you to select either low-level direct from the cartridge, or a high-level from a built-in preamp. It should work just fine for you. I would expect that AUX inputs would use the second (high level) option.
A:AnswerBecause it has a preamp, the AT LP60X has both phono and line output jacks. I believe that you would use the line output to connect to the Bose system.
A:AnswerYes, it should. It has a 1/8” stereo jack as an output. Just get a cable that splits out to Right and Left Phono jacks and it should play fine on your older system, provided it has Phono jack inputs.
A:AnswerYes, it will work with your older amplifier if you have an AUX RCA input. I'm a broadcast engineer. My recording ear picked up a hum that others would not hear. The hum is not normal even for an entry level unit. I upgraded to the Audio Technica LP120USB. It is available in both black & silver, I had to get silver unit shipped to me while the black unit was readily in stock in the Kansas City Metro area stores.
A:AnswerYou have to connect it to something that has speakers associated with it. For example, you can connect the turntable to a stereo receiver or amplifier that has (passive type) speakers connected to the receiver or amplifier, but you can also connect the turntable directly to a pair of powered (aka active) type speakers. Powered speakers contain the amplifier that you would normally find inside a stereo receiver or amplifier therefore a receiver or amplifier is not needed. Powered speakers will typically have an On-Off Switch and a volume control on them. At least one of the speakers (the one that contains the amplifier) will need to be plugged into an AC power outlet.
A:AnswerYes, I just hooked it up to a 1950 Grundig Tube amp and it works fine. However if you really appreciate the full sound and warmth of listening to vinyl, I would spend the extra money and step up to the Audio-Technica AT-LP120XUSB. I have this for my main system and the sound, even with older used records is very good. With the model you are looking at, it wont play as well with older records and they wont have the warmth you are looking for.
