A:AnswerHello sam,
Thank you for reaching out to us! The Electrolux Laundry Tower Single Unit Front Load 4.4 Cu. Ft. Washer & 8 Cu. Ft. Electric Dryer features a stacked design that takes up half the floor space, freeing up your laundry room for extra storage. As for the drain hose length, the product specifications do not explicitly mention it. However, you can find this laundry tower at 76.25 inches in height, 27 inches in width, and 32 inches in depth. The washer has a capacity of 4.4 cubic feet, while the dryer has an 8 cubic feet capacity. Keep in mind that the dimensions provided include the entire unit, so the actual drain hose length may vary. If you need precise measurements, feel free to ask!
- Owen
A:AnswerHello, David! Thank you for reaching out. The exhaust system must be vented outside with an approved vent hood. No screen or grate of any mesh size is allowed to cover the exhaust opening. Use 90° quick-turn elbow to vent left or right from the dryer. Never exceed more than 4 - 90˚ elbows in the exhaust duct system. To learn more about the installation instructions, please visit this link to see the installation manual for your reference; https://na2.electroluxmedia.com/Original/Electrolux/Electrolux%20Assets/Document/Installation%20Instructions/A25903101.pdf. We hope this information is useful to you. ~Sam
A:AnswerHello, Kjack! The power supply - 3-wire or 4-wire, 120/240
volt, single phase, 60 Hz, Alternating Current. You can find this information on page 12 of the owner's manual under pre-installation requirements. We hope this is helpful to you. ~Sam
A:AnswerHello Seloigh,
Thank you for reaching out to us! Certainly, Susan! Let’s address your questions about the Electrolux ELTE 7300AW Laundry Tower Single Unit:
Clearance Behind the Dryer: The Electrolux Laundry Tower™ features a vertical stacked design that takes up half the floor space. However, specific clearance requirements may vary based on local building codes and installation guidelines. I recommend checking the user manual or contacting Electrolux directly for precise clearance measurements.
Stacking Kit: Yes, you’ll need a stacking kit to securely stack the washer and dryer. The Electrolux Front-load Laundry Stacking Kit (STACKIT7X) is compatible with this model1. It helps save floor space by allowing you to stack the units vertically. You can find this kit online or at appliance stores.
Pedestal Kit: The Electrolux Laundry Tower™ does not require a pedestal kit. Since it’s already a vertical stack, it doesn’t sit on a pedestal. However, if you prefer a raised height for easier loading and unloading, you can explore other Electrolux models that come with optional pedestal drawers.
if you have any other question, feel free to ask!
- Owen
