Questions & Answers

Q: QuestionThe microwave just went out while heating up food

Asked 3 years ago by T.

• A:Answer Probably a blown fuse inside the unit . You might be able to find youtube video on how to replace the fuse. If that doesn't work then you have a bigger problem. I had an older model similar to this one it also went out i Replace the fuse but it immediately blew.

  Answered 3 years ago by Crazyman

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondoes the overall depth dimension include the handle?

Asked 3 years ago by babs.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Hey there, thanks for the interest in our microwave! The overall depth does not include the handle. If you have any other questions, reach out at any time. We'd love to see you in our GEA family! - Guy@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have a GE over the range microwave, model #JVM1730DM1BB and need to replace it. Which model is comparable to this because I’m unable to find the exact same model. I want another GE microwave to match my other kitchen appliances. Thanks!

Asked 3 years ago by Oneclassygal.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer Hey there, we appreciate you reaching out to us and we're more than happy to help. We first wanted to let you know that all 30" over-the-range microwaves are approximately the same width and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. We just suggest using the mounting bracket of your new microwave as these are model specific. With that said, we believe the following models would make great replacements: JVM6175BLTS, JVM6175DKBB, and JVM3160DFBB. We're hoping this helps and we're wishing you the best. Let us know if you need anything else. - Guy@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionLooking to replace ge microwave model number jvm1339ww ,this older microwave has an interior vented fan . I would like to replace it with model number JVM3160dfww and see if this correct model also comes with and interior exhausted fan and filter?

Asked 3 years ago by steve.

• A:Answer Hi there, thank you for the question. We are happy to let you know that this microwave can be installed with a recirculating venting option. It does require a charcoal filter under parts number WB02X35687, which is included with your microwave. This filter should be replaced every 6 to 12 months. We hope this helps, and please feel free to let us know if there are any ways we can assist you in the future. -Elliot@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI NEED TO KNOW WHAT PRESET BUTTONS THERE ARE. MY CURRENT MW HAS POPCORN, POTATOES, VEGGIES, ETC.

Asked 3 years ago by JO.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer IT has all the bells and whistles.

  Answered 3 years ago by microVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionis mounting hardware included

Asked 3 years ago by newone.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Yes hardware included. Have to be very careful with upper paper template to line up the holes for the top two bolts. Need a helper to hold up while too bolts are installed. Otherwise fairly easy install.

  Answered 3 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI need to replace a PVM1870SM3SS GE Profile 1.8 cu ft over the range microwave. So many new ones I see are larger or smaller. What GE unit(s) fill that same space without exceeding it?

Asked 3 years ago by TBW17.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer This one fits perfectly over my 30 inch range.

  Answered 3 years ago by RosannVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhy is the cut-out height (16 1/2 ", see installation manual) larger than the height of the microwave (16 1/8)? What is the height of the mounting plate? Will the microwave fit into a space that is 16 1/4 tall (top edge of tile to bottom of cabinet)?

Asked 3 years ago by Anonymous.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Yes

  Answered 3 years ago by DonewithbestbuyVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWe need to replace a GE Spacemaker Model JVM230. GE doesn't manufacture them any more. Will this model work in the same space over the range? We need a model that vents internally.

Asked 3 years ago by Ally.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Space the same. Mounting hardware a little different, different holes.

  Answered 3 years ago by GEmicrowaveVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat color is the clock light display? Is it quiet?

Asked 3 years ago by Mar.

• A:Answer Clock display is white and very bright, like led bulb. Microwave is quiet.

  Answered 3 years ago by MonaVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionThe rear of model JVM3160RFSS is 16-1/8”. I have a drywall insert (into plaster wall) that is only 16” long. Is the screw hole on the mounting plate at least 3/4” from the bottom of the plate so that the screw will fit into the 16” drywall insert?

Asked 3 years ago by Sylvia.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Hello- Thanks so much for checking with us. We are happy to help! The screw hole used on the mounting plate will have 3/4” from the bottom of the plate so that the screw will fit into the 16” drywall insert. We hope this is helpful! If you have any additional questions, please reach out to us directly. We are here to help! Joyce@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is in the box? Is the mounting bracket/hardware included?

Asked 3 years ago by Pkd.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Yes, bracket, screws, template are all included.

  Answered 3 years ago by Charbroil

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this microwave have the annoying repetitive beeps that tell that the cycle is done? Some models have a beep that occurs every couple minutes until the door is opened. This is completely unnecessary. I won't purchase this microwave if so.

Asked 3 years ago by KRat.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer The beep is very quiet. It's not annoying at all.

  Answered 3 years ago by Joan

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill they remove old microwave in order to install the new one or do I have to have someone else remove the old one?.

Asked 3 years ago by Mary.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Yes, they will remove old microwave and take it with them if you want.

  Answered 3 years ago by Great

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this model be a good replacement for JVM1650BH02?

Asked 3 years ago by Senior.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Black

• A:Answer Hello. Thanks for reaching out! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We hope this helps, and should you have any additional questions, please reach out to us!- Kianna@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe have a 13 year old GE silver over the oven 1100 watt micro wave that just died(glad it lasted this long. JNM1851SMSS. Do you have an 1100 Watt silver over the oven model that we could replace this one with?

Asked 3 years ago by Ted.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Hi - Thank you for your interest in a new GE over-the-range microwave. We have identified 2 models for your consideration that most closely match your existing model in features and capacity -- https://www.bestbuy.com/site/compare?skus=5291501,5291514 -- The primary difference is the JNM7196SKSS model comes from the factory already set-up for internal (recirculating) venting which is the same as your existing model. The other model we've suggested would need to be converted to internal venting. We do include the directions and the charcoal filter needed to complete the conversion. The great news is all our over-the-range models will fit in a 30" wide opening. We do recommend using the new mounting bracket and hardware that will be packaged with the new model. We truly appreciate your loyalty to our GE Appliances brand and are confident you would be pleased with either of these new models. Please reach out again if you have additional questions. All our best! Kind regards - Vikki@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHi, how wide is this microwave please?

Asked 3 years ago by Kelly.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer 30 inches

  Answered 3 years ago by Microwave

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat type of electrical circuit should I use with the GE microwave jvm3160rfss? Is it ok to use a 15 amp circuit?

Asked 3 years ago by Emmanuel.

This question was asked about the related product: GE - 1.6 Cu. Ft. Over-the-Range Microwave with Convenience Cooking Controls - Stainless Steel

• A:Answer Hey there, and thanks for this great question! The unit should be connected to a separate 15- to 20- ampere branch circuit single grounded outlet. We hope that information helps, but if you’d like to view the detailed electrical requirements for the model, those are available in our Installation Instructions. The document is available on our GE Appliances website when you look up the model number, then go to the product page and the ‘Owner Support’ section (linked in the options under the picture of the appliance). If you have any other questions or concerns, we are happy to offer assistance any time. All the best! -Sarah@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have a GE JVM3160DF3WW that just died. Will this unit replace my unit without any modifications? Thank you!

Asked 3 years ago by Claire.

• A:Answer The JVM3160DFWW has different mounting hole locations than the JVM3160DF3WW does. I learned the hardway that after see it incorrectly saying no modifications or same mounting hardware could be used. Especially the one on the left is like 3 inches towards the center of the microwave. The mounting bracket could still be used though.

  Answered 3 years ago by waggs181

  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (3)