“How do you remove surface glass to change the light bulb?”
Answer This Question
1-1 of 1 Answer
Hello, thank you for reaching out to us. If the interior light needs to be replaced, follow these instructions: 1. Unplug the microwave oven. 2. Remove or open the vent grille or vent cover. Instructions are in the "To Remove the Charcoal Filter" section of your Owner's Manual. 3. Once the vent is removed or opened, remove the lamp compartment cover by removing the screw that holds the cover in place. If the cover is too difficult to access, a service technician will be required. 4. If you have a charcoal filter, remove it so that you can see the access area. On some models, the access area is small and it can be difficult to get to the light cover. 5. Remove the bulb Incandescent lamps: Remove by pushing inward gently and turning counter-clockwise. Halogen lamps: Gently pull straight out 6. Replace the old bulb with the same wattage bulb. 7. Replace the compartment cover and vent grille. 8. Plug in the microwave. However, if the cooktop/nite light needs to be replaced, follow these instructions: 1. First disconnect the power at the main fuse or circuit breaker panel, or pull the plug. 2. Remove the screw from the side of the light compartment cover and lower the cover until it stops. 3. Be sure the bulb is cool before removing. Break the adhesive seal by gently unscrewing the bulb. 4. Screw in the new bulb, then raise the light cover and replace the screw. Connect electrical power to the oven. We hope this helps. If you have any additional questions, please feel free to reach back out to us. HC
Sorry, there was a problem. Please try again later.