A:AnswerHi Mary - The range hood is 29 7/8" wide and requires a 30" cutout (30" is standard for a range hood). We suggest to view the Quick Specs at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVX5300EJ_SJ_R2_16.pdf - We also offer GE® 24" Under The Cabinet Hood
JVX3240SJSS. See Quick Specs: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVX3240SJ_R2_16.pdf - Keep in touch! Sue
A:AnswerPer the install manual
This hood is designed to be vented vertically using a 7" round duct OR a 3.25 X 10 " rectangular duct OR horizontally using 3.25 X 10" rectangular duct.
Hope this helps you
A:AnswerHi Woody- Approximate Product Dimensions are as follows: (WxHxD) (in.) 29 7/8 in x 5 1/2 in x 20 in. We suggest to view the Quick Specs at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVX3300EJ_SJ_R2_16.pdf - EASY INSTALLATION- Play Video:https://www.youtube.com/embed/nrqTMMN9feA?rel=0 - Thanks for considering GE! SUE@GEA
A:AnswerHi Drafty- The range hood is not designed for ceiling installation in an island. We also offer GE Profile™ Series 36" Island Hood PV977NSS. Check out the Installation Instructions for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-80550-4.pdf - Thanks for considering GE! SUE@GEA
A:AnswerHi Maury- The range hood has a four-speed with boost, 310-CFM venting system to effectively removes smoke, grease, odors and moisture. Sones Ratings: 7.0 (Boost Speed), 5.5 (High Speed), 3.0 (Medium Speed), 1.0 (Low Speed). You should certainly be pleased with your choice. EASY INSTALLATION- Play Video: https://www.youtube.com/embed/nrqTMMN9feA?rel=0 - Keep in touch! SUE@GEA
A:AnswerHi RICKYA12345 - Yes, JXHC1 - Power Cord Kit is available and sold separately. Allows range hoods to be installed with a plug and receptacle instead of being "hard-wired". We encourage you to view the Installation Instructions for complete details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-80783-4.pdf - EASY INSTALLATION- Play Video: https://www.youtube.com/embed/nrqTMMN9feA?rel=0 - Thanks for choosing GE! SUE@GEA
A:AnswerHi wang78- OPTIONAL REMOTE CONTROL JXRC70 allows you to control your ventilation lighting and fan speed from anywhere in the kitchen. Optional Accessory JXRC70 is sold separately: https://www.geapplianceparts.com/store/parts/spec/JXRC70 - EASY INSTALLATION- 10 minutes or less by one person. Play Video: https://www.youtube.com/embed/nrqTMMN9feA?rel=0 - Keep in touch! SUEatGEA
A:AnswerWe have the slate one and it has the option to be vented or ventless. There are knockouts that can be used to make it vented, however it comes set up to be ventless for recirculation into the kitchen. It does NOT come with the charcoal filter though. That needs to be purchased separately.
A:AnswerThe exhaust fan is only on the left side of the hood. I'm not certain of the unit's ability to exhaust at the back horizontally. The installer explained that the unit will only exhaust from the left, front side.
A:AnswerHi - The range hood is equipped with halogen bulbs (110V, 35W - GU10). Before attempting to replace the lights, make sure that the light switch is turned off. Rotate light counterclockwise to unlock and pull out. Wearing latex gloves may offer a better grip. Replace with new light of same type, making sure pins are inserted properly into the sockets of the lamp holder and turn clockwise to lock. You'll find the instructions on removal on page 8 of the Use and Care Guide at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-80783-4.pdf - Purchase RANGE HOOD BULB, 110V, 35W - GU10 #WB25X24863 online at GEApplianceparts.com: https://www.geapplianceparts.com/store/parts/spec/WB25X24863 - We hope this is helpful. Keep in touch at GEAppliances.com - Sue
A:AnswerHi Zavtra- Thanks for choosing GE! We are sorry to hear of the difficulty removing the bulb. Before attempting to replace the lights, make sure that
the light switch is turned off. Rotate light counterclockwise to unlock and pull out. Wearing latex gloves may offer a better grip. Replace with new light of same type, making sure pins are inserted properly into the sockets of the lamp
holder and turn clockwise to lock. All lamps need to be GU10 compatible. For reference, see page 8 of the Owner's Manual: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-80783-4.pdf - We hope the latex gloves help. Keep in touch! SUE@GEA
A:AnswerIt comes without any duct holes pre-opened, so round or rectangle can be chosen at installation time. Ours came out of the box set up as 'ventless' (recirculating into the kitchen) and a piece needs to be installed to duct outside (which the installer did not do and we are still trying to resolve with BestBuy)
