“How do I get rid of water remaining after wash cycle?”
Answer This Question
1-2 of 2 Answers
Hi Mickey - To achieve a drain and spin, select the Rinse & Spin cycle and then deselect the Extra Rinse option (See page 9 of the Owner's Manual). If your front-load washer is not draining or is draining slowly, make sure the drain hose is not kinked or clogged. The drain hose goes into a standpipe, drain or other household plumbing .Remove the drain hose and pour a quart of water into the standpipe or drain. If water will not drain, a plumber is recommended. Make sure the washer is not trying to drain more than 8 ft. higher than the floor. The washer pump filter may be clogged. It is possible for small items from clothing or from pockets to pass to the drain pump. The washer does have a filter to capture these lost items so that they are not dumped into the plumbing or drain; however, if the items are captured by the filter, they cause a clog that can slow or prevent water from draining during the cycle. View the following link- CLEANING A FRONT LOAD WASHER PUMP FILTER: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16687 - Or view the Owner's Manual for details: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-90583-2.pdf - Keep in touch at GEAppliances.com - Sue
Sorry, there was a problem. Please try again later.It needs to he calibrated by the G eek squad
Sorry, there was a problem. Please try again later.