A:AnswerHello kari, thank you for your question. This washer is designed to stack with any of our GFV55, GFD55, GFD65, and GFD85 model dryers using the GFA28KITN stacking kit. Please feel free to reach out to us should you have any questions or concerns about your appliances. We are always here to help. -Chris@GEA
A:AnswerNo, you're simply buying a washer and a dryer. Everything else is extra. That means the air duct, washer power cord, the air duct for the dryer, and the stacking brackets are extra.
A:AnswerHello Lora, thank you for your question. Yes, the GFP1528SNWW is the only compatible pedestal for this washer. We apologize for any inconveniences this may cause. We hope this helps! Please let us know if you have any additional questions. You can reach out to us further at the “Contact Us” link on our website. – Chris@GEA
A:AnswerHi Lora, thanks for your question! When measuring with the leveling legs in the shortest position, the height from the floor to the bottom of the door is 9.75”. The door is 25" in diameter, so you can add another 12.5" to the height from the floor to bottom of door. (so 9.75" + 12.5"). We hope this helps! Stay safe. -Michael@GEA
A:AnswerHello there swarner,
Thank you for reaching out. This is a good question. Typically, most sheets will fit. As long as the sheet fits below the balance ring and isn't stuffed in the tub tightly. We hope this was helpful. Stay in touch! Mike@GEA
A:AnswerHi Rick, these are great questions that we're glad to answer. Yes, this is the last expensive front load washer that we currently manufacture. Also, the dimensions of this washer are 39 3/4 H x 28 W x 32 D. We hope this is helpful! We'd love to have you in our GE Appliances family. - Guy@GEA
A:AnswerHello Mikt800,
Thank you for reaching out. We'll be happy to answer your question. When reviewing the Installation Instructions for this washer, it shows the height of the washer with the legs fully extended - 40 5/8" and when fully retracted it is 39 3/4" tall. The difference is less than an inch. With the legs fully retracted the washer is just slightly off the floor. You would need no more clearance than it would take to get the wrench on the level leg to adjust them as needed. https://files.bbystatic.com/3%2FvTY6tIA8U6BkU58%2Bc4iA%3D%3D/e32b48d4-49f8-4dd2-a9a4-6fcad4429282.pdf. We hope this helps. All the best! Mike@GEA
A:AnswerHi Nena - Thank you for your interest in this front load washer! We are happy to tell you more about the limited warranty. Our GE manufacturer's warranty extends for one year from the original date of purchase and covers any part of the washer which fails due to a defect in materials or workmanship. During this time, we will also provide all labor and related service to replace the defective part free of charge. You can learn more about what is covered within this warranty on page 31 of the washer's Use and Care Manual. Should you have any additional questions about the washer's warranty or the many features that it offers you, please feel free to reach out to us via our Contact Us page online. We are always happy to help! -Eliza@GEA
A:AnswerHi there! Thanks for reaching out to us. This unit has an overall height when stacked of 79-1/2". It will be a close fit, but it would fit into that slot. Stay safe! Emily@GEA
A:AnswerHi Mommabear1218! Thanks for reaching out to us. Since cleaning with Affresh is not included in our cleaning instructions, we do not have a recommendation of which setting you should use. You can find the cleaning instructions on page 15 of the Use and Care manual online at this link: https://files.bbystatic.com/3%2FvTY6tIA8U6BkU58%2Bc4iA%3D%3D/341e7a25-d8f8-48b8-846c-77bb0b27af2e.pdf
We hope this helps! Emily@GEA
A:AnswerVery stackable, yes. Remember to purchase the GE stacking kit, also available from Best Buy, and they will coordinate the entire installation including the stacking kit.
A:AnswerIt should, but will be tight depending on what kind of closet door you have (you may have to remove the door). I have a 34" wide closet that fit both units stacked, and there was enough room for the installers without removing the door.
