“I've got this for a year. I've just notice there is a red light indicated the filter needed to be change. Please advice the instruction to change the filter and the part that I need to order. Thank you”
Answer This Question
1-1 of 1 Answer
Hi, Great question! We appreciate you choosing GE Appliances and we'd be happy to help you with the filter. We found that this light does indicate the charcoal/grease filter should be replaced/cleaned. The charcoal filter cannot be cleaned, it must be replaced. The correct replacement is WB02X35607. To remove the charcoal filter unplug the microwave oven and remove the vent grille mounting screws. Next, tip the grille forward and lift out to remove. Now, you can remove the charcoal filter and slide another in it's place. Slide the bottom of the vent grille back into place and push the top until is snaps into place. Finally, replace the mounting screws and plug the microwave back in. To remove the vent filters, slide them to the rear using the tabs. Pull down and out. To clean the vent filters, soak them and then swish around in hot water and detergent. Don’t use ammonia or ammonia products because they will darken the metal. Light brushing can be used to remove embedded dirt. Rinse, shake and let dry before replacing. To replace, slide the filters into the frame slots on the back of each opening. Press up and to the front to lock into place. We hope this information helps. If you have any further questions let us know. Have a great day! -Sylvia@GEA
Sorry, there was a problem. Please try again later.