A:AnswerHi Jo- Thanks for viewing! Our Over-the-Range Microwaves cannot be installed in a cabinet with a trim kit. We suggest to view our GE Profile™ Series 2.2 Cu. Ft. Countertop Microwave Oven
PEB7226SFSS and GE® Optional 30" Built-In Trim Kit JX7230SFSS or GE® Optional 27" Built-In Trim Kit JX7227SFSS. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. We suggest to view the Quick Specs for dimensions including cabinet cutout requirements: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - Keep in touch! SUE@GEA
A:AnswerNo there isn't a trim kit that fits. The bestbuy and GE website states there is one, but its wrong. We purchased both, but the kit doesn't fit once they tried to install the microwave. We had to purchase another microwave instead.
A:AnswerHi Michael-this is Sue from GE Appliances. We're excited to hear of your interest! We suggest to view our GE® 1.4 CU. FT. COUNTERTOP MICROWAVE OVEN JES1460DSBB-APPROXIMATE DIMENSIONS (HXWXD) 12 1/2 in x 21 7/8 in x 16 3/8 in. Thanks for checking with us. Enjoy!
A:AnswerHello - Do not operate the oven in the microwave mode without the turntable and the
turntable support seated and in place. Make sure all cookware used in your microwave oven is suitable for microwaving. Most glass casseroles, cooking dishes, measuring cups, custard cups,
pottery or china dinnerware which does not have metallic trim or glaze with a metallic sheen can be used. We recommend that you review the section titled: "Microwave-Safe Cookware" on pg. 6 of the owner's manual for more helpful information. Thanks for being part of the Profile family! Take care. -Don@GEA
A:AnswerHi Misty, thanks for reaching out! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. This makes choosing a replacement microwave easy! NOTE: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. - We think that you'll really like the following model. Search for it a see what you think: PVM9179SKSS. We hope that this helps! Stay safe. -Michael
A:AnswerHi ceber- The microwave has a three-speed, 400-CFM venting system to remove smoke, steam and odors. All over-the-range microwaves can be vented to the outside using an equivalent total of 140 feet of rigid 3 1/4" x 10" rectangular or rigid 6" round ducting. Shipped from the factory to vent out the top (vertically), but can also be vented out the rear (horizontally). OVER-THE-RANGE MICROWAVE DUCTING INFORMATION: http://products.geappliances.com/appliance/gea-support-search-content?contentId=17416 - Also, check out the Installation Instructions for complete details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40755.pdf - Keep in touch! SUE@GEA
A:AnswerHi TANMOY- Thanks for choosing our GE Profile Series! We are sorry to hear of this unfortunate experience and apologize for any inconvenience this has caused. We suggest to reset the electronics by unplugging or by turning off power at the circuit breaker for 30 seconds or so. If you need further assistance, we encourage you to take advantage of your warranty and contact GE Appliance Service at 1-800-432-2737 for assistance or conveniently schedule an appointment online: http://www.geappliances.com/service_and_support/service/ - Thanks for reaching out to us! SUEatGEA
A:AnswerI removed a similar looking logo from a different GE microwave and learned that there are 3 holes in this area! GE support was kind enough to send me a replacement badge.
A:AnswerHi Judi - Thanks for choosing GE Profile Model PVM9005SJSS and welcome to the family. We are sorry to hear the display is flashing strange characters and apologize for any concern and inconvenience this has caused. Fault codes are programmed in all microwave oven controls. These codes help our technicians quickly diagnose issues with the microwave oven. We suggest viewing the following link - MICROWAVE ERROR, FAULT OR FUNCTION CODES: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16575 - We suggest turning off power at the circuit breaker (or unplug) for 30 seconds to reset the electronics. To reset the clock, view the Use and Care Manual here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40756-2.pdf - A technician may be required for an accurate diagnosis. To schedule service online visit: https://www.geappliances.com/ge/service-and-support/service.htm - We hope this is helpful. If you have any additional questions, don’t hesitate to ask. We are also happy to help at GEAppliances.com! Sue
