A:AnswerThe replacement for JES2051SN2SS is microwave model GCST20S1WSS. These are both countertop microwaves and are not designed to be built into a cabinet opening.
A:AnswerModel PCWK22U1WBB is very similar in dimensions and features to your current model. However, the existing trim kit will not work, as trim kits are model specific. For model PCWK22U1WBB, the compatible trim kits are JX7227DLBB-27" and JX7230DLBB-30".
A:AnswerThe trim kit is an optional accessory and an additional cost. This particular model has the option for stainless or fingerprint resistant slate.
27- inch: JX7227SLSS, JX7227ELES
30- inch: JX7230SLSS, JX7230ELES
If you prefer black you can select either of the following: JX7227DLBB & JX7230DLBB
You can view the prices on BestBuy's site or speak to a salesperson.
A:AnswerThe trim kits are model specific and have different part numbers. The dimension on these microwaves is slightly different. We recommend getting the trim kit that is compatible with the replacement model. You'll need either of the following trim kits. JX7227DLBB & JX7230DLBB
A:AnswerWe do not advise installing this microwave in your current cutout space due to the depth of your cutout. If your receptacle is in the cabinet, your cutout would need to be 22" minimum. However, if your receptacle is located outside of the cabinet, the cutout depth would need to be 19-1/2" minimum. Installing this appliance in your current cutout would cause the microwave to protrude from the trim kit and cabinet. In this case, we would advise altering the cutout space for the proper installation of this microwave model.
A:AnswerThis model won’t fit on your space, this is because the unit is much deeper than your cabinet about 25″ vs 18″, and built-in microwaves need to be fully enclosed, not sticking out.
A:AnswerWe recommend checking out model PCWK22U1WBB. This model shares the same finish, cooking features, and has a larger capacity. However, the cutout dimensions are different, being 17 W x 10 H 1/8 x 18 3/8 D compared to your previous models cutout dimensions of 14-1/2 W x 10-1/8 H x 14-1/2 D. We recommend checking your space to see if it can meet the requirements posted in the specifications. These can be viewed by clicking on "Features" under the product image, then scrolling down the page on the right, until you see a link under "Specification Sheet."
