“How do i change the permanent setting on the thermostat”
Answer This Question
1-1 of 1 Answer
Hi Pm! With the Honeywell 7-Day Programmable Thermostat you are able to turn the schedule off, make adjustments to the current schedule, or place the thermostat on a temporary or permanent hold. To turn the schedule feature off please follow these steps: 1) Press “Fan” and the up arrow button on the right hand side of the thermostat simultaneously and hold for approximately 3 seconds. The screen will change to display two numbers and the button designations will be “Done”, “Back”, “blank”, “Next”. 2) Press “Next” until you see the function number— the larger number on the left—“16”. 3) Change options for any function by pressing the up or down arrow button until the correct option (smaller number on right) is displayed. In your case you will change the smaller number to “0”; this is turning the schedule off and you will manually set the temperature on your thermostat. 4) Press “Done” to save and exit. If you want to make adjustments to the current schedule, please do the following: 1) Press “Set Clock/Day/Schedule”, then “Set Schedule”. 2) Press the up or down arrow button to set your Monday (Mon) Wake time, then press “Next”. 3) Press the up or down arrow button to set the temperature for this period, then press “Next”. 4) Set time and temperature for the next time period (Leave). Repeat Steps 2 and 3 for each time period. 5) Press “Next” to set time periods for the next day. Repeat Steps 2 through 4 for each day. 6) Press “Done” to save and exit. Note: Make sure the thermostat is set to the system mode you want to program (Heat or Cool). If you want to place your thermostat on a temporary hold from the current schedule in place, please do the following: Press the up or down arrow button to immediately adjust the temperature. The new temperature will be maintained only until the next programmed time period begins. To cancel the temporary setting at any time, press “Cancel”. The program schedule will resume. If you want to permanently override the current schedule you will do the following: 1) Press “HOLD” to permanently adjust the temperature. This will turn off the program schedule. 2) Press up or down arrow button to adjust the temperature setting. The temperature you set will be maintained 24 hours a day until you manually change it or press “Cancel” to resume the program schedule. I hope you found this helpful! Thank you!
Sorry, there was a problem. Please try again later.