“How do I underclock the ram in bios from 5200 to 4800?”
Answer This Question
1-2 of 2 Answers
I don't have except keystrokes but here's the idea. To change the RAM speed on an iBUYPOWER Y40 or any other PC, you'll need to access the BIOS or UEFI settings. Here's a general guide:Restart Your PC: Restart and enter the BIOS/UEFI setup. This is typically done by pressing a key during startup, like F2, F10, F12, or DEL, depending on your PC's make and model.Navigate to the Memory Settings: Once in the BIOS/UEFI, look for settings related to memory or RAM, often found under tabs like "Advanced," "AI Tweaker," "OC (Overclock)," or similar.Adjust the RAM Speed: In the memory settings, you can change the RAM speed. This may be referred to as "Memory Frequency" or something similar. You might also need to adjust the timings and voltage to match your RAM's specifications.Save and Exit: After making the changes, save and exit the BIOS/UEFI. Your computer will reboot with the new settings.A few important notes:Ensure your RAM supports the speed you're setting. Overclocking beyond supported limits can cause system instability or damage.Changing BIOS/UEFI settings can affect system stability. If you're not experienced, it's advised to proceed with caution or seek assistance.If you encounter issues after changing settings, you can reset the BIOS/UEFI to its default configuration.Remember, the specific steps can vary based on your PC's motherboard and BIOS/UEFI version. If you're unsure, consult the motherboard's manual or iBUYPOWER's support resources for detailed instructions.
Sorry, there was a problem. Please try again later.Unfortunately since there are multiple brands of MB we use I cannot give specific instructions, though there should be an advance settings option that will allow to access more MB features and you can find a TAB that has the features you are looking for.
Sorry, there was a problem. Please try again later.