A:AnswerYour question is rather a difficult one to answer with a direct number. It would depend on the specific packages (size, shape, weight, etc) that you're planning on putting in the freezer.
A:AnswerWe live in a similar climate -Desert that gets above 100 degrees most days in summer and the freezer is in our garage and has been working fine for us
Hope that helps
A:AnswerThe drain hole are usually found within the freezer at the bottom back. Turn the temperature control to Off and unplug the freezer. For draining, place a tray beneath the outer drain plug. Unscrew and remove the drain plug. This will let the water flow out in the tray.
A:AnswerYes, this unit has a Drain Plug. During defrosting the ice melts into the cabinet, so remove the drain plug on the inside of the freezer, then place a shallow pan under the drain outlet so the defrost water can drain. Check the pan occasionally so that the water does not overflow.
A:AnswerHello,
Thank you for your confidence! We appreciate you taking the time to write us what's important to you. We understand you are trying to purchase an extra basket for it and you can do so, by reaching us at this link below for us to guide you to the correct path!
Thank you again, for being part of the Insignia Family!
- Arin A.
Insignia Support
Contact us: https://www.insigniaproducts.com/contact-us
A:AnswerMeasure the inside area of your Armada and compare with listed freezer measurements
It was worth the delivery charge as they put the freezer right where you want it
Didn’t have to have someone come help me unload it etc etc
A:AnswerI have only had this freezer a short time but the way it looks for frost inside , it may only be once a year for self defrost, depending on conditions where Freezer is Placed and How often you open it. . To defrost just remove items from freezer and place in some coolers temporarily, then unplug freezer and let defrost, and then drain any water from Freezer through the drain plug. Wipe Dry and plug back in. wait about an hour and replace items back in Fridge.
A:AnswerNo, none of our freezers are garage ready. Please check the considerations below before selecting a location for your freezer:
- This freezer is designed to be free standing only, and should not be recessed or built-in.
- Place your freezer on a floor that is strong enough to support the freezer when it is fully loaded.
- Allow six inches (15 cm) of space between the back and sides of the freezer and any surrounding walls to allow for proper air ventilation.
- Adjust the feet to keep the freezer level.
- Locate the freezer away from direct sunlight and sources of heat, such as a stove, heater, or radiator. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extremely cold temperatures may also prevent the freezer from
performing properly.
- Avoid locating the freezer in moist areas.
Adolfo M. - Insignia Products
A:AnswerI built a bar top that weighs about 80# that sit on top of the freezer. It is evenly distributed with a 3/4" particle board base. No problems with that much weight.
A:AnswerThe manufacturer warranty on this freezer is a limited one year warranty. If you ever have issues with the unit please contact our call center at 1-877-467-4289 any day from 8 am to 9 pm CST. All you need to have is the receipt, which will tell when and where you bought it and validate the warranty.
A:AnswerHi Lanyssa,
A small 5 cubic foot chest freezer needs 850 watts to start, and 100 watts to run. A 2000-watt generator is up to the task to power this size of a chest freezer. If you have any questions or concerns, please use the link below to reach us and also you can contact this phone number 877-467-4289 for further assistance.
Insignia Products
Nikki
https://insigniaproducts.com
A:AnswerFrom the back bottom edge to the top of the door while its open measures 57" my unit is on bricks in my garage so u may need to add a 1" or so to accommodate the adjustable feet it has.... hope thats helps
