A:AnswerThe M300 itself weighs 10.6 lb (4.8 kg) I hope that this helped. If you have any other questions or require additional information, if you could please email us directly at support@kantoliving.com.
A:AnswerYour TV has a compatible VESA pattern of 200mm x 200mm and is under the weight limit of 80 lb, it should work great! If you have any other questions or require additional information, if you could please email us directly at support@kantoliving.com and we would be happy to help
A:AnswerYour TV has a compatible VESA pattern of 400mm x 300mm and is under the weight limit of 80 lb, with that it should work great! If you have any other questions or require additional information, if you could please email us directly at support@kantoliving.com and we would be happy to help
A:AnswerThe M300 will be centered on the stud when extended, but will be 5" offset when retracted. Please email us directly at support@kantoliving.com if you have any other questions and we'll be happy to help.
A:AnswerYour TV has a compatible VESA pattern (bolt pattern) of 100x100 and is under the weight capacity of the M300 so it should work well! Please email us directly at support@kantoliving.com if you have any other questions and we'll be happy to help.
A:AnswerYour TV has a compatible VESA pattern (bolt pattern) of 200x300 and is under the weight capacity of the M300 so it should work well! Please email us directly at support@kantoliving.com if you have any other questions and we'll be happy to help.
A:AnswerThe M300 is compatible with a 200x200 VESA pattern. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerDenise, Yes, the M300 can tilt down as well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerSony46inchOwner, Your TV has a compatible VESA pattern (bolt pattern) of 300x300 and is under the weight capacity of the M300, so it should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerYour TV has a compatible VESA pattern (bolt pattern) of 200x200 and is under the weight capacity of the M300 so it should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerMacster, Your TV has a compatible VESA pattern (bolt pattern) of 400x400 and is under the weight capacity of the M300 so it should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerThis mount extends 19.6". Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerI have bought this mount for both an outside and inside tv. It is very sturdy and states can withhold up to 55”. I would believe it can withstand your Sanyo 52”. The bracket on the back can extend with our without extensions. I would recommend this. I personally like how it only needs one stud.
A:AnswerPinker, That TV has a compatible VESA pattern and will get about 85 degrees of swivel with the M300. If you are looking for the most swivel, a mount with a little more extension, like 22" will get you that. Please email us directly if you would like a recommendation or have any other questions.
A:AnswerCurved TVs don't mount any differently than flat TVs so as long as your TV does not exceed the VESS and weight capabilities of the M300 then it should work well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerJoe,
Your TV needs bolts that are 45mm. The M300 should have 50mm bolts in the box, combine them with the 5mm spacer to get the correct length. If for some reason you receive an older version of the mount with shorter bolts just contact our support team and we'll get you the hardware you need. Keep in touch
A:AnswerAndrew,
Your TV has a compatible 200x200 VESA pattern and is under the weight limit of the M300, should work great! Please email us directly through the support button on our website if you have any other questions and we'll be happy to help.
