A:Answerbadgefolaf,
Your TV has a compatible 200x200 VESA pattern (bolt pattern) and is under the weight capacity of the PDX650 so it should work well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerDavid, Please contact us directly using the support button on our website and pass along your TV's full model number so we can confirm compatibility, thanks.
A:AnswerFred, Your TV has a compatible 400x400 VESA pattern (bolt pattern) and is under the weight capacity of the PDX650so it should work well. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerPlease contact us directly using the support button on our website and pass along your TV's full model number to confirm compatibility, thanks.
A:AnswerDee,
Your TV has a compatible 400x400 VESA pattern (bolt pattern) and is under the capacity of the PDX650 so it should work well. Feel free to contact us directly using the support button on our website if you have any additional questions.
A:AnswerJimmy,
Your TV has a very unusual VESA pattern or 440x650, unfortunately none of our mounts can support that. The issue is the vertical spacing of 650mm, the largest spacing any of our mounts (The T6090) will accommodate is 600mmm. Wish I had a better answer, feel free to contact us directly using the support button on our website if you have any additional questions.
A:AnswerPlease contact us directly using the support button on our website and pass along your TVs full model number so we can confirm compatibility, thanks.
A:AnswerThe mount can't be adjusted on the fly, but how easily it adjusts depends on how tightly you set the adjustment bolt. I guess it would be possible to set the bolt loose enough to adjust it by hand, however if it is adjusted loosely it may not hold the TV at a fixed degree of tilt.
A:Answerst0uty,
The 50L420U has a compatible VESA pattern (bolt pattern) and is under the weight capacity of the PDX650, should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerYou shouldn't run into any issues but please pass along theTV's full model numbers using the support button on our website and we'll confirm compatibility, thanks.
A:AnswerThe PDX650 will not work, it is not wide enough. The PDX680 will work with your TV. Feel free to contact us if you have any additional questions, thanks.
A:AnswerKangaj,
Technically it will work since it has a compatible VESA pattern and is under the wright capacity of our mount. Keep in mind that a lot of the inputs on centered on the TV which means any mount you use will block these inputs. You likely will need to use longer bolts and spacers to create a gap / space for the cables. Keep in touch using the support button on our website if you have any additional questions, thanks.
A:AnswerYour TV has a compatible 600x400 VESA pattern (bolt pattern) and is under the weight capacity of the PDX650, should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerYou can pull the mount out far enough, it goes out almost 2' from the wall. The question will be the size of the unit versus the coverage of the TV over it. If they are too much the same it will not be covered. You really cannot put anything within the space of the mount without interfering with the arms and their movements. The part that mounts to the wall is about 11 1/2" x 23" approximately. The frame that attaches to the TV is larger. my OLED mounts lower on the screen due to its construction. The frame for the TV is adjustable for the TV. but if you pull it away from the wall you should be OK at least in that respect. hope that helps.
A:AnswerZarecs, If you can please email us directly through the support button on our website, and pass along your TV's model number we'll be happy to help determine compatibility.
A:AnswerThe PDX650 will not work, you will need the PDX680 which is a wider mount. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerThomas, I've looked up the information for your TV, it has a 600x400 VESA pattern (bolt pattern) and weighs 103lbs,so it is compatible with the PDX650. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerRen, Thank you for your question. I've looked up the information for your TV, it has a 400x400 VESA pattern (bolt pattern) and weighs 79lbs so it is absolutely compatible wih the PDX650. If you have any other questions please feel free to email us directly at [email protected] and we'll be happy to help.
A:AnswerDave, Thank you for your question. Unfortunately without the TV's full model number we would not be able to tell you if your TV will be compatible. If you can please email us directly at [email protected] and pass along your TV's model number we'll be happy to help.
