“What size box do I use for the receptacle and what height do I install outlet for the double oven ?”
Answer This Question
1-3 of 3 Answers
I used the instructions provided by Lowes: https://pdf.lowes.com/installationguides/057112080727_install.pdf The armored cable attached to the oven provides flexibility in siting.
Sorry, there was a problem. Please try again later.The cabinet base platform must be able to support 190lbs (86kg). If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven. Make sure the base is level and the front of the cabinet is square. If the cabinet base is not level, the oven glides will tend to slide out when opening the door. If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered. If the cabinet does not have a front frame and the sides are less than 3/4” (1.9 cm) thick, shim both sides equally to establish the cutout width.The junction box must be flush with the rear wall of the cabinet as shown below. Allow at least a 23” clearance for the door depth when it is open. Kitchen cabinets in contact with the oven must be heat resistant up to 194°F (90°C), and fronts of nearby units up to at least 158°F (70°C). We would be happy to help you by providing an installation manual for this wall oven. You can contact our Customer Support by any of the below options: Phone: 1-800-243-0000 LiveChat: https://www.lg.com/us/support/chatbot Email: https://www.lg.com/us/support/email-appointment Facebook Messenger: https://www.facebook.com/LGUSA/ Twitter: @LGUSSupport The LG Community Forum is also a great resource for getting help from other LG customers: https://lgcommunity.us.com
Sorry, there was a problem. Please try again later.240 junction box, 8 gauge cable.
Sorry, there was a problem. Please try again later.
