“I bought the lg sj4r, hooked it up and was only able to get the sound bar and subwoofer working. I've tried resetting and the pair button to get the rear speakers to work but they are still soundless. What should I do next to get the speakers to connect?”
Answer This Question
1-2 of 2 Answers
I had some troubles too with the initial connection of the rear speakers. Turns out that the contacts MUST be snug when plugged in the ports. Otherwise, a poor connection results in no output at all. I trimmed the factory stripped wire (they were too long and exposed), and happened to insert them too far afterwards. Hence, no sound. But, after a few attempts to re-seat the wire, I got sound. The ferrite core is also important...Be sure to loop your wires at least two times (per instruction manual). Finally, if you have the unit set to ASC without surround, there will not be any signal going to the rear. Try setting the system to Bass Boost or Cinema. Your system will set it to surround mode (holding rear speaker volume up button for more than two seconds) or passthrough ( rear speaker volume down button for more than two seconds), and you should get signal then. So far, nothing but incredible sound!
Sorry, there was a problem. Please try again later.We would be happy to look into the connectivity issues you are experiencing while setting the unit up. Our support team is available via Twitter @LGUSSupport, Facebook https://www.facebook.com/LGUSA/ or you can give us a call at 800-243-0000. ^CP
Sorry, there was a problem. Please try again later.