A:AnswerManual recommended cleaning the gasket. Shouldn't be molding unless a humidity problem. The is a humidity sensor in the unit that alarms if it's to high
A:AnswerI am sorry, the factory did not provide that specification. Please seek answers at https://lgcommunity.us.com. The LG Community Forum is a great resource for getting help from other LG customers. ^Daphane
A:AnswerYou will need a tap cold water supply for the steam feature. Attach the cold water inlet hose to the
cold water inlet on the back of the dryer. ^Daphane
A:AnswerYes, this washer needs to be connected to a water supply. All of our washers require a water supply. Some have a steam feature that require a tap cold water supply or have a cup be filled with water for steam. ^Daphane
A:AnswerYes- we did the side vent option. It’s easy to do yourself and a great option if you are limited by depth of the closet you are installing. The kit cost me about $65 online from various retailers.
A:AnswerDid not solve my depth issues. Still about 37 inches from wall to front. Venting the dryer from the side does not save space. Vent is nearly dead center from side-to-side and about 44 inches from the floor.
A:AnswerClosets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm2) must be installed no lower than 6 feet above the floor. One lower vent opening with a minimum opening of 24 sq. in. (155 cm2) must be installed no more than one foot above the floor. The width of the unit is 27”. For the door to open 90˚ you need 55”D. To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 1'' (2.5 cm) at the sides and 4'' (10 cm) behind the appliance. ^Daphane
A:AnswerThe unit is 74-3/8". To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 1'' (2.5 cm) at the sides and 4'' (10 cm) behind the appliance. Be sure to allow for wall, door, or floor moldings that may increase the required clearances ^Daphane
A:AnswerMost all front load units have issues with odor. We recommend cleaning the door gasket and seal regularly. The washer has a Tub Clean cycle. Tub clean is a special cycle designed to clean the inside of the washer. ^Daphane
